Weather Clearing issue

Hi Graham,

It is very complex for the following reasons:

When FSiPanel is positionning your aircraft, the altitude is based on the known barometric setting, 1013 normally or any other setting when set by FSiPanel.

for example, if you create a 8 miles final and the correct altitude to intercept your glideslope is 4000ft, FSiPanel will set the altitude for the local QNH of your approach. The software knows it and can then correct the aircraft baro accordingly to be at the correct height.

If FSiPanel sets your aircraft for a STD QNH 1013 and ASN changed it to 1030 for example, the aircraft will not be at the right altitude... and the trimming phase could fail.

However, I have talked with ASN developer and pending on the next update, FSiPanel will set the weather VIA ASN as an option, you will still have to set your weather on the panel BUT ASN will take care of it.

Wish you safe landings,

Regards,

J-P

Could but FSiPanel must know the baro setting before loading the flight... so an interaction between the two softwares is required. Will work on it with next ASN update.