Print Page | Close Window

EZCA 2.7 for P3DV4.3 talk about...

Printed From: SimForums.com
Category: Flight One Partner Forums
Forum Name: EZdok Beta Forum
Forum Description: For new builds, ideas, and testing.
URL: https://www.simforums.com/forums/forum_posts.asp?TID=60286
Printed Date: June-24-2019 at 2:30pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: EZCA 2.7 for P3DV4.3 talk about...
Posted By: Marniftarr
Subject: EZCA 2.7 for P3DV4.3 talk about...
Date Posted: June-28-2018 at 6:42am
Here you can leave feedback about working of EZCA for P3D V4.3

https://www.simforums.com/forums/ezca-2-6-for-p3d-v4-1-p3d-4-0-p3d-v3-xx-fsx_topic59058_post383440.html#383440" rel="nofollow - Link for download....


Hi all !

There is latest 2.7.0.15 for beta test where we fixed "Invalid license" error.
Please download it then test.


https://drive.google.com/open?id=1KtcNumweq3LGRrW7afC3CNb5tFxPMNov" rel="nofollow - Downlaod 2.7.0.15...








-------------
EZdok software

www.ezdok-camera.com



Replies:
Posted By: Marniftarr
Date Posted: June-30-2018 at 7:47pm
Dear user, we took some time to studies  on the license problem.
This is probably related to the confusion in the location of the files ezcamera2.lic
Anyway, if you encounter a message about "Your license is invalid" you need to correctly reset then reinstall  the EZCA2  license. To do this, take a few steps:

1. Remove the file ezcamera2.lic from the folders

C: \ Windows
C: \ EZdok Software

Verify that the file has been deleted from both folders. It is important.

2. Download and run the original installer from the Flight1 website:
http://flight1.100megabyte.com/EZdokCamera2.exe" rel="nofollow - http://flight1.100megabyte.com/EZdokCamera2.exe

3. Follow the steps circled in a red circle.









In this step  enter your purchase data which you got during purchase EZCA.

Next, the installer will tell you that the license will be installed in the C: \ EZdok Software folder. Do not change this way! Click Ok.

After this step, the installation of EZCA2.0 will be started. You must continue the installation until it is complete.

Step 4. Verify that the ezcam2.lic file is in the folder
C: \ Windows
C: \ EZdok Software

5. Install the update 2.7.0.10.





If you see this message during validate your Flight1 account:



Please reset validate counter for your license. This operation you can do here:

http://www.flight1.com/view.asp?page=activate



We apologize for these inconveniences.

Be sure to write in this thread if the problem is resolved or not. This will help to eliminate this unpleasant problem as soon as possible.
Sincerely your  EZCA team.





-------------
EZdok software

www.ezdok-camera.com


Posted By: Marniftarr
Date Posted: July-02-2018 at 6:25am
Hi , guys !

In the first message of this thread i give link to latest 2.7.0.15.

Please update your EZCA. 

Report here about working. 

Is the bug "Invalid license" is fixed or not ?



-------------
EZdok software

www.ezdok-camera.com


Posted By: cavaricooper
Date Posted: July-02-2018 at 12:20pm
Marniftarr-

I am pleased to report that this appears to have SOLVED my licensing issue.  Also, the usual P3D crash on EZCA exit seems to have been solved as well.

WELL DONE, and thanks!

Carl


Posted By: Zurijet
Date Posted: July-02-2018 at 1:12pm
Same here, thanks!


Posted By: SimonIH
Date Posted: July-02-2018 at 2:07pm
Alright, so when I press the joystick button to return to virtual cockpit, it apparently turns into a black screen. I can avoid this by not pressing the joystick button, but that is quite annoying obviously.

https://www.youtube.com/watch?v=81k6CYbcGuA" rel="nofollow - https://www.youtube.com/watch?v=81k6CYbcGuA

Any solution on that? :)


Posted By: Marniftarr
Date Posted: July-02-2018 at 4:20pm
Originally posted by SimonIH SimonIH wrote:

Alright, so when I press the joystick button to return to virtual cockpit, it apparently turns into a black screen. I can avoid this by not pressing the joystick button, but that is quite annoying obviously.

https://www.youtube.com/watch?v=81k6CYbcGuA" rel="nofollow - https://www.youtube.com/watch?v=81k6CYbcGuA

Any solution on that? :)

You made little error. 
Do not use mouse menu for select cameras. After install EZ , the EZ will take control  for switchind cameras. Built in simulator  camera switching  system will Off.
Use "A"  "S"  keys  for switch to Spot camera. Use EZCA hot key to return to VC camera . For this , you should assign hot key or joy button to desired EZCA VC camera.

For example - 
The first EZCA VC camera named "Captain". I assign "1"  HotKey to this camera. 
I use A S key for switch to Spot , then I will press "1' to switch back to "Captain" camera. 
Remember , only with assigned HotKey to EZCA VC camera  you can return to VC mode.




-------------
EZdok software

www.ezdok-camera.com


Posted By: MelCologne
Date Posted: July-02-2018 at 4:58pm
Invalid license also resolved for me :-)

And i also found the reason why i was not able to click anything in FSLabs with EZDOK.
I had to move the captains chair a little bit to the back, because my view point was inside the chair Wink


Posted By: Marniftarr
Date Posted: July-02-2018 at 7:23pm
I had to move the captains chair a little bit to the back, because my view point was inside the chair 
===
It very very old bug since FSX.. 
Just for info - the P3D main window ( in all versions include 4.3)  have "FS98MAIN" class name today :-)

some bugs is  copied from FSX


-------------
EZdok software

www.ezdok-camera.com


Posted By: vagnerern
Date Posted: July-03-2018 at 10:29am

I have the following problem in configuration tools, see the message:

 

Cannot criate file “C:Users\VBL\AppData\Roaming\LockheedMartin\Prepar3Dv4\Controls\Standard.XML”.Acesso Negado.


I need help! 



Posted By: Marniftarr
Date Posted: July-03-2018 at 4:49pm
Hi , Vagnerer , please redirect your question to our tech support via ticket system.
http://www.ezdok-camera.com/troubleshooting" rel="nofollow - http://www.ezdok-camera.com/troubleshooting
Here is talk about bugs in a beta version (2.7) of EZ. 
Configure tool have old 2.6 version.



-------------
EZdok software

www.ezdok-camera.com


Posted By: vagnerern
Date Posted: July-03-2018 at 7:04pm
So, but this error gave in the installation of the update of version 2.7 EZ, so I wrote here ....


Posted By: vagnerern
Date Posted: July-03-2018 at 8:06pm
In the upgrade to version 2.7 I had the following error, see message:

Can not create file "C: Users \ VBL \ AppData \ Roaming \ LockheedMartin \ Prepar3Dv4 \ Controls \ Standard.XML" .Access Denied.

Actually I wanted to know how to install and update correctly, since I had installed version 2.0.2.18, I just installed 2.7 and I was left with this problem, I do not know if I did the right thing.

I need help!


Posted By: JUAN86270
Date Posted: July-03-2018 at 9:26pm
hi need helps  zoom not working v4.3 



-------------
HOBBIE AVIATION PASION


Posted By: gabriellc
Date Posted: July-04-2018 at 6:01pm
Originally posted by JUAN86270 JUAN86270 wrote:

hi need helps  zoom not working v4.3 


I have the same problem, I was using the zoom when I closed the simulator after 40 minutes of flight

p3d v4.3


Posted By: planechaser72
Date Posted: July-05-2018 at 1:06am
Having the same issue here, zoom seems to be locked in Aircraft external view.

Virtual cockpit zoom works fine though.


Posted By: BruceR
Date Posted: July-05-2018 at 1:20am
Originally posted by planechaser72 planechaser72 wrote:

Having the same issue here, zoom seems to be locked in Aircraft external view.

Virtual cockpit zoom works fine though.



I'm the same as planechaser72

Bruce R


Posted By: david553
Date Posted: July-05-2018 at 1:55am
Same here, external view locked at 0.48 and cant be changed, vc zoom view is working ok


Posted By: Nickbe
Date Posted: July-05-2018 at 4:28am
Hi!
Thank you all for the information. We study the problem with zoom in external views.


-------------
Nick B.
Ezdok Software


Posted By: Marniftarr
Date Posted: July-05-2018 at 1:23pm
Hi , guys ! 
Now we are looking for the problem ZOOM. This can take 2-3 days. It is required to analyze a lot of code. Please be patient.


-------------
EZdok software

www.ezdok-camera.com


Posted By: Marniftarr
Date Posted: July-05-2018 at 1:31pm
This is 2.7.0.15 EDIT 2  version.

Please test it. It is same 2.7.0.15 but resh.exe is modified. It should fix ZOOM error.
Please tell me about any problem with this buld. 


https://drive.google.com/open?id=120c2VyBNI9e30-Y4b97dcV0nCd36rjfB" rel="nofollow - Download 2.7.0.15 edit 2...



-------------
EZdok software

www.ezdok-camera.com


Posted By: Terblanche
Date Posted: July-05-2018 at 6:27pm
Originally posted by DJJOSE DJJOSE wrote:

Why am I getting this error?
Thanks.


Is this with EZCA 2.7 BUILD 15 ...??


Posted By: Marniftarr
Date Posted: July-05-2018 at 6:40pm
Originally posted by DJJOSE DJJOSE wrote:

Why am I getting this error?

Thanks.

Please download latest 2.7.0.15 in the first message of this thread.




-------------
EZdok software

www.ezdok-camera.com


Posted By: vagnerern
Date Posted: July-05-2018 at 7:06pm
Please, any help with my problem??? 


Posted By: Nickbe
Date Posted: July-05-2018 at 7:12pm
Originally posted by vagnerern vagnerern wrote:

Please, any help with my problem??? 


Hi!
Vagnerern , please redirect your question to our tech support via ticket system.
http://www.ezdok-camera.com/troubleshooting" rel="nofollow - http://www.ezdok-camera.com/troubleshooting
(form bottom of page)


-------------
Nick B.
Ezdok Software


Posted By: JUAN86270
Date Posted: July-06-2018 at 10:33am
?
it does not allow me to modify the zoom

helps please..  Llorar


-------------
HOBBIE AVIATION PASION


Posted By: Marniftarr
Date Posted: July-06-2018 at 5:19pm
JUAN86270
What build of EZCA you using now ?
2.7.0.15 or  2.7.0.15 edit 2 ?




-------------
EZdok software

www.ezdok-camera.com


Posted By: supersym
Date Posted: July-07-2018 at 2:23am
hi ! 
I tried both, but are they only for p3dv4.3 ?
because I get licence error with both in p3dv2, after crashing from p3d...


Posted By: Nickbe
Date Posted: July-07-2018 at 10:43am
Originally posted by supersym supersym wrote:

hi ! 
I tried both, but are they only for p3dv4.3 ?
because I get licence error with both in p3dv2, after crashing from p3d...


Hi!
For Prepar3D versions older than 4.3 you should use EZCA 2.6.0.32. Versions starting from 2.7 were released for compatibility with P3D4.3. All functionality remains the same as version 2.6.0.32.


-------------
Nick B.
Ezdok Software


Posted By: JUAN86270
Date Posted: July-07-2018 at 12:29pm
?
Yes..  2.7.015 Editar 2


-------------
HOBBIE AVIATION PASION


Posted By: jcsemedo
Date Posted: July-08-2018 at 6:55pm
Originally posted by Marniftarr Marniftarr wrote:

This is 2.7.0.15 EDIT 2  version.

Please test it. It is same 2.7.0.15 but resh.exe is modified. It should fix ZOOM error.
Please tell me about any problem with this buld. 


https://drive.google.com/open?id=120c2VyBNI9e30-Y4b97dcV0nCd36rjfB" rel="nofollow - Download 2.7.0.15 edit 2...

Hi there. Gentlemen,

I am having the same problem with zoom issue...

Just downloaded this last version...

No way!!!

The problem still here; Zoom blocked in 0,48 I guess.

Thanks,
~
jc
Portugal


Posted By: jcsemedo
Date Posted: July-08-2018 at 6:57pm
Originally posted by Marniftarr Marniftarr wrote:

This is 2.7.0.15 EDIT 2  version.

Please test it. It is same 2.7.0.15 but resh.exe is modified. It should fix ZOOM error.
Please tell me about any problem with this buld. 


https://drive.google.com/open?id=120c2VyBNI9e30-Y4b97dcV0nCd36rjfB" rel="nofollow - Download 2.7.0.15 edit 2...



Posted By: jcsemedo
Date Posted: July-08-2018 at 6:59pm
The same zoom problem here; Blocked 0,48% I guess...

Just downloaded this last edit version & tried.

Still blocked!!!!

Thanks,

jc


Posted By: david553
Date Posted: July-09-2018 at 1:58am
Foe me as well, using the latest build, still blocked at a zoom of 0.48 in external view.


Posted By: Nickbe
Date Posted: July-09-2018 at 4:10am
Hello!
We know that the zoom control of the mouse wheel does not work in external views. But you can still change the zoom with the keyboard + / - buttons.
The fix will be available in the next build, but it will take some time.


-------------
Nick B.
Ezdok Software


Posted By: wothanfja16
Date Posted: July-09-2018 at 6:00am
I just got the "Invalid License" error with 2.7.0.15 Edit 1 after a few minutes of flying.

Now I have updated to 2.7.0.15 Edit 2, but have not tested fully - has there been done anything from Edit 1 to Edit 2 that possible would fix the issue ?

Otherwise the bug might still exist !

FinnJ


Posted By: Marniftarr
Date Posted: July-09-2018 at 6:51am
wothanfja16
Is this happen for all aircrafts ?

If yes  - please reinstall license. 

Procedure of reinstall:

https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383563.html#383563" rel="nofollow - https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383563.html#383563



-------------
EZdok software

www.ezdok-camera.com


Posted By: wothanfja16
Date Posted: July-09-2018 at 6:58am
Originally posted by Marniftarr Marniftarr wrote:

wothanfja16
Is this happen for all aircrafts ?

If yes  - please reinstall license. 

Procedure of reinstall:

https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383563.html#383563" rel="nofollow - https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383563.html#383563


I only saw this in the A3A Texan-6, restarted P3D and flew again in the T-6 for 15 mins without further issues.

So I will wait and see if it happens again.


Posted By: Marniftarr
Date Posted: July-09-2018 at 10:41am
wothanfja16
Do you have reinstalled license now ?



-------------
EZdok software

www.ezdok-camera.com


Posted By: elmanav
Date Posted: July-09-2018 at 11:39am
Good day.
I update P3D to v4.3 and Ezdok. I have problem with World cameras. I create a new camera, point the anchor point, turn the head, zoom. I save this camera. But the by camera save only the zoom. I return where I was at the beginning of the creation of a new world camera. Cry


Posted By: wothanfja16
Date Posted: July-09-2018 at 2:00pm
Originally posted by Marniftarr Marniftarr wrote:

wothanfja16
Do you have reinstalled license now ?



No I will wait and see if the error pops up again.




Posted By: Marniftarr
Date Posted: July-09-2018 at 3:34pm
Originally posted by elmanav elmanav wrote:

Good day.
I update P3D to v4.3 and Ezdok. I have problem with World cameras. I create a new camera, point the anchor point, turn the head, zoom. I save this camera. But the by camera save only the zoom. I return where I was at the beginning of the creation of a new world camera. Cry

Is your EZ version 2.7.0.15 edit 2 ? 
Please update it:
https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383693.html#383693" rel="nofollow - https://www.simforums.com/forums/ezca-2-7-for-p3dv4-3-talk-about_topic60286_post383693.html#383693




-------------
EZdok software

www.ezdok-camera.com


Posted By: wothanfja16
Date Posted: July-09-2018 at 3:42pm
I have the ezcamera2.lic here:

C:\EZdok Software\ and C:\Users\Finn\AppData\Local\VirtualStore\Windows\ 

But my other Flight 1 *.lic files are also both in the C:\Flight One Software\ and C:\Users\Finn\AppData\Local\VirtualStore\Windows\ folders causing no issues.

I have no ezcamera2.lic in C:\Windows\


Posted By: Marniftarr
Date Posted: July-09-2018 at 3:49pm
It is very strange. Such problems arise when the user has guest rights on his PC.
Anyway, this is not a normal situation. Probably the license check comes from different folders, and EZ can not find the correct path to these files.
Delete all the .lic files and take the steps to reinstall the licenses that I gave in the previous answer.

Or did you do it?


-------------
EZdok software

www.ezdok-camera.com


Posted By: wothanfja16
Date Posted: July-09-2018 at 7:30pm
Originally posted by Marniftarr Marniftarr wrote:

It is very strange. Such problems arise when the user has guest rights on his PC.
Anyway, this is not a normal situation. Probably the license check comes from different folders, and EZ can not find the correct path to these files.
Delete all the .lic files and take the steps to reinstall the licenses that I gave in the previous answer.

Or did you do it?


No i did not yet, since I only had this error once.

I´m on Win 7 Home 64bit and I´m Administrator on the PC and actually think all is Ok.

Both Ezcamera2.lic files are from 2017 and has been there ever since with no problem, like the other Flight 1 *.lic files.


Posted By: Marniftarr
Date Posted: July-10-2018 at 4:13am
Sometimes, approximately 1 user at 500 needs to reinstall the license, because the PC checksum changes after some Windows updates. I can not find out which updates are changing the checksum because the checksum  is calculated on the external DLL.
If on the build 2.7.0.15 you see the message Invalid license - this means that there is a need to reinstall the license.
It is just notice.


-------------
EZdok software

www.ezdok-camera.com


Posted By: supersym
Date Posted: July-10-2018 at 5:33am
Originally posted by Nickbe Nickbe wrote:

Originally posted by supersym supersym wrote:

hi ! 
I tried both, but are they only for p3dv4.3 ?
because I get licence error with both in p3dv2, after crashing from p3d...


Hi!
For Prepar3D versions older than 4.3 you should use EZCA 2.6.0.32. Versions starting from 2.7 were released for compatibility with P3D4.3. All functionality remains the same as version 2.6.0.32.
thanks Smile


Posted By: Neume
Date Posted: July-10-2018 at 6:41pm
Originally posted by elmanav elmanav wrote:

Good day.
I update P3D to v4.3 and Ezdok. I have problem with World cameras. I create a new camera, point the anchor point, turn the head, zoom. I save this camera. But the by camera save only the zoom. I return where I was at the beginning of the creation of a new world camera. Cry

I have this issue too.


Posted By: Nickbe
Date Posted: July-11-2018 at 1:54am
Originally posted by Neume Neume wrote:

Originally posted by elmanav elmanav wrote:

Good day.
I update P3D to v4.3 and Ezdok. I have problem with World cameras. I create a new camera, point the anchor point, turn the head, zoom. I save this camera. But the by camera save only the zoom. I return where I was at the beginning of the creation of a new world camera. Cry

I have this issue too.


Hi!
I'll check the world cameras tonight. Thank you for your feedback.


-------------
Nick B.
Ezdok Software


Posted By: Nickbe
Date Posted: July-12-2018 at 4:39am
Hi!
The problem with the inability to maintain the position of the world cameras was confirmed. This will be fixed in the next updates of Ezca 2.7.


-------------
Nick B.
Ezdok Software


Posted By: elmanav
Date Posted: July-12-2018 at 4:43am
Very good. We look forward to.



Posted By: Marniftarr
Date Posted: July-12-2018 at 2:28pm
Ok. Guys. 
This is fixed "Worldcamera problem" new build of 2.7 version.

Please download then test it. 


https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt" rel="nofollow -


Posted By: mefisssto
Date Posted: July-12-2018 at 4:17pm
Hi, I am getting crash of ezdok when start up prepar 3d v4.3

I have latest beta version installed

Any idea how to fix it?




Posted By: planechaser72
Date Posted: July-12-2018 at 5:51pm
Just wondering if this build fixed the zoom in the External Cameras ( though I saw in a previous post that it was going to be fixed in the next build )   


Posted By: mattdee
Date Posted: July-13-2018 at 2:02am
I'm running 2.7 for V4.3 in VR and I have to say it's so good to be using EZDok once more. I've been flying VR since the beginning of the year but until V4.3 I've had to rely on Flyinside. Unfortunately Flyinside and EZDok didn't work together. And besides Flyinside was/is a program half finished, meaning it felt as though it never made it past alpha stage. But now with the improvements LM have made it's now possible to fly inside VR without 3rd party software. And add to this EZDok and I'm in heaven! The whole VR experience is not perfect but it getting better all the time.


Posted By: Nickbe
Date Posted: July-13-2018 at 3:29am
Originally posted by mefisssto mefisssto wrote:

Hi, I am getting crash of ezdok when start up prepar 3d v4.3
I have latest beta version installed
Any idea how to fix it?


Your problem is not repeated in other users. This must be solved individually. Write to support. Fill out the form at the bottom of the page:
http://www.ezdok-camera.com/troubleshooting" rel="nofollow - http://www.ezdok-camera.com/troubleshooting


-------------
Nick B.
Ezdok Software


Posted By: Marniftarr
Date Posted: July-15-2018 at 5:42am
Originally posted by planechaser72 planechaser72 wrote:

Just wondering if this build fixed the zoom in the External Cameras ( though I saw in a previous post that it was going to be fixed in the next build )   

Guys, now is the summer time and the period of the passes. Developers EZCA departed  on  rest till the middle of August. I will try to fix this problem in the next week, but I can not promise to do it quickly. Somehow this is the so-called "cosmetic problems". Personally, I'm responsible for the kernel in the code and solve the problems with the licenses and eliminate the "fatal erros". The interface and external functions are handled by another person who is now on vacation. But I will try to do everything next week.



-------------
EZdok software

www.ezdok-camera.com


Posted By: vons
Date Posted: July-15-2018 at 9:36am
When I exit P3Dv3 (not p3dv4).
I see Ezdok v27015 is not closing. I waited several minutes. It failed to close.
It is still in the Task manager (Win7-64 in use).




-------------
Vaughan Martell


Posted By: Nickbe
Date Posted: July-16-2018 at 8:13am
Originally posted by vons vons wrote:

When I exit P3Dv3 (not p3dv4).
I see Ezdok v27015 is not closing. I waited several minutes. It failed to close.
It is still in the Task manager (Win7-64 in use).


Hi!
Version EZCA 2.6.0.32  has this same problem? If not, you'd better use it.
Version 2.7 is released for compatibility with Prepar3D4.3.
Otherwise, version 2.6.0.32 has the same functionality.


-------------
Nick B.
Ezdok Software


Posted By: vons
Date Posted: July-16-2018 at 10:05am
Originally posted by Nickbe Nickbe wrote:

Originally posted by vons vons wrote:

When I exit P3Dv3 (not p3dv4).
I see Ezdok v27015 is not closing. I waited several minutes. It failed to close.
It is still in the Task manager (Win7-64 in use).


Hi!
Version EZCA 2.6.0.32  has this same problem? If not, you'd better use it.
Version 2.7 is released for compatibility with Prepar3D4.3.
Otherwise, version 2.6.0.32 has the same functionality.


I use Win7-64, FSX Acceleration(boxed), P3Dv3.4 and P3Dv4.3.

I used the Ezdok 27015 installer (screenshot) to install into FSX Acceleration (boxed), P3Dv3.4 and P3Dv4.3.

Did I do correctly?
Edit: today I tested again and it closed ok.
Previous day I had done a new RTT disable in FSDT software which caused a FSDT error ... Then I enabled it to get rid of the FSDT error. Will have to test it again later for conflicts.






-------------
Vaughan Martell


Posted By: gabriellc
Date Posted: July-16-2018 at 7:34pm
hi,
I have problems with the exterior zoom of the aircraft. When I want to zoom this immediately returns to its position without possibility of realizing it. The strange thing that inside the cabin works very well.

any solution to this?

installed software EZCA v2.7.0.16, P3Dv4.3


Posted By: Nickbe
Date Posted: July-17-2018 at 1:41am
Originally posted by gabriellc gabriellc wrote:

hi,
I have problems with the exterior zoom of the aircraft. When I want to zoom this immediately returns to its position without possibility of realizing it. The strange thing that inside the cabin works very well.

any solution to this?

installed software EZCA v2.7.0.16, P3Dv4.3


Hello!
Option "ActiveZoom" working from a wheel mouse was made for VC internal views.
For external cameras, this option was not originally intended.
The ability to enable "ActiveZoom" for external cameras remained accidentally by mistake.

The zoom in the external cameras is controlled with the plus and minus buttons on the keyboard.

We will consider the possibility of using "ActiveZoom" on external cameras and possibly implement this possibility. Or turn it off for external cameras.:)


-------------
Nick B.
Ezdok Software


Posted By: planechaser72
Date Posted: July-17-2018 at 6:08pm
Originally posted by Nickbe Nickbe wrote:

Originally posted by gabriellc gabriellc wrote:

hi,
I have problems with the exterior zoom of the aircraft. When I want to zoom this immediately returns to its position without possibility of realizing it. The strange thing that inside the cabin works very well.

any solution to this?

installed software EZCA v2.7.0.16, P3Dv4.3


Hello!
Option "ActiveZoom" working from a wheel mouse was made for VC internal views.
For external cameras, this option was not originally intended.
The ability to enable "ActiveZoom" for external cameras remained accidentally by mistake.

The zoom in the external cameras is controlled with the plus and minus buttons on the keyboard.

We will consider the possibility of using "ActiveZoom" on external cameras and possibly implement this possibility. Or turn it off for external cameras.:)
 
Thank you for the clarification. I fortunately have saved many camera sets with the external zoom ( for wing views on aircraft) with a 0.98 zoom . No need to wheel zoom at all.. As long as we have the ability to zoom in VC properly, everything works fine here.
 
As long as when in external wing view ( e.g. PMDG, FSL A320, MJC Q400) , I don't touch the + and - keys. If I do , my original zoom is gone , EZDOK acts weird , fortunately I am able to go into the menu and click RESTART APPLICATION and within a few seconds I have my proper zoom back :)
 
 


Posted By: Marniftarr
Date Posted: July-18-2018 at 5:48am
Hi , guys.

The problem of Active ZOOM on external cameras will be corrected by the middle of next week.

Now I need to know if the new protection works correctly in 2.7.0.16, do you have other problems not related to EZCA functionality? For example, random BSOD or CTD or Fatal errors, false-positive reaction by antivirus.?

Now I need your confirmation to release .16 build as the official update for P3D4.3

If there are no such problems, then tomorrow I will make an official update, and we will start correcting ActiveZOOM for version 2.7.0.17.



-------------
EZdok software

www.ezdok-camera.com


Posted By: cavaricooper
Date Posted: July-18-2018 at 6:20am
Marniftarr-

I keep getting a P3D crash UPON EXIT ONLY. This stopped with a prior build of EZCA but has begun again with the last 2 builds. Works fine in the Sim- but when I EXIT then P3D crashes every time.

FWIW

C


Posted By: Nickbe
Date Posted: July-18-2018 at 6:27am
Originally posted by cavaricooper cavaricooper wrote:

Marniftarr-

I keep getting a P3D crash UPON EXIT ONLY. This stopped with a prior build of EZCA but has begun again with the last 2 builds. Works fine in the Sim- but when I EXIT then P3D crashes every time.

FWIW

C


I noticed that I have an error when I exit P3D (api.dll) if the "Deboarding" process in GSX is not completed before the end.
If all the actions of the GSX is completed, the exit from P3D is happening without errors.


-------------
Nick B.
Ezdok Software


Posted By: cavaricooper
Date Posted: July-18-2018 at 6:30am
Nick-

No GSX here.....

C


Posted By: Nickbe
Date Posted: July-18-2018 at 6:52am
Originally posted by cavaricooper cavaricooper wrote:

Nick-

No GSX here.....

C


Can any other conflict. Maybe should try to close all other programs - in my case there is no conflict with Traffic Live, PRO-ATC/X and ASP4.

Try exit EZCA before exit from P3D. Error still here?


-------------
Nick B.
Ezdok Software


Posted By: gabriellc
Date Posted: July-18-2018 at 9:26am
I have no problem, except external cameras. use ASP4, ivap



Posted By: vips23
Date Posted: July-18-2018 at 1:18pm
Hi,
I am having a problems with the world Camera.

1. I select the image and edit it and save it. looks great.
2. when I switch back from cockpit view to world camera to view what i just the camera I made
    it looks as follows: Please advise what the problem is.

Thanks your help.

Here are the pic.


1. Selected to adjust this.



Camera in Position and saved.



On Viewing after saving switching cockpit view to World camera. What Happened here!!!!!






-------------
VN


Posted By: simperfi
Date Posted: July-18-2018 at 4:01pm
install beta 2.7.0.16 and your world camera issue should be fixed 

https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt" rel="nofollow - https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt

Originally posted by vips23 vips23 wrote:

Hi,
I am having a problems with the world Camera.

1. I select the image and edit it and save it. looks great.
2. when I switch back from cockpit view to world camera to view what i just the camera I made
    it looks as follows: Please advise what the problem is.

Thanks your help.

Here are the pic.


1. Selected to adjust this.



Camera in Position and saved.



On Viewing after saving switching cockpit view to World camera. What Happened here!!!!!






-------------
Kevin


Posted By: JUAN86270
Date Posted: July-18-2018 at 10:53pm
I have the same problem too.
I can not update my external camera
please some solution ..?Infeliz


-------------
HOBBIE AVIATION PASION


Posted By: vips23
Date Posted: July-18-2018 at 11:14pm
Kevin,

U back.. havent seen you in a long time. All ok buddy..

Nice to see you back.. last you said u were with X-plane 11 :)
 
I have been doing P3D v4  for a while now. I like it..

Will get back to u if I have any more issues..

Thanks as always..

Take care

Vips


-------------
VN


Posted By: vips23
Date Posted: July-19-2018 at 12:11am
Kevin,
That fixed it!! Thanks

Originally posted by simperfi simperfi wrote:

install beta 2.7.0.16 and your world camera issue should be fixed 

https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt" rel="nofollow - https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt

Originally posted by vips23 vips23 wrote:

Hi,
I am having a problems with the world Camera.

1. I select the image and edit it and save it. looks great.
2. when I switch back from cockpit view to world camera to view what i just the camera I made
    it looks as follows: Please advise what the problem is.

Thanks your help.

Here are the pic.


1. Selected to adjust this.



Camera in Position and saved.



On Viewing after saving switching cockpit view to World camera. What Happened here!!!!!






-------------
VN


Posted By: vips23
Date Posted: July-19-2018 at 12:13am
See message below for the link to download the latest version, it will fix the problem as it did for me.

Originally posted by JUAN86270 JUAN86270 wrote:

I have the same problem too.
I can not update my external camera
please some solution ..?Infeliz


-------------
VN


Posted By: vips23
Date Posted: July-19-2018 at 12:15am
install beta 2.7.0.16 and your world camera issue should be fixed 

https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt" rel="nofollow - https://drive.google.com/open?id=1f2ciN42D00a6TwoSFfIhWpEy4MgViCSt



-------------
VN


Posted By: f.skywalker
Date Posted: July-19-2018 at 3:19am
I just wanted to ask what now the latest version of the Ezdoc cam for 4.3.
I use the 2.7.0.15 and have no problems.
I do not use the Worlcam.
There are already .15 Edit2 or .16 or ...

Thank you
Frank from EDDM


Posted By: Nickbe
Date Posted: July-19-2018 at 3:37am
Originally posted by f.skywalker f.skywalker wrote:

I just wanted to ask what now the latest version of the Ezdoc cam for 4.3.
I use the 2.7.0.15 and have no problems.
I do not use the Worlcam.
There are already .15 Edit2 or .16 or ...

Thank you
Frank from EDDM


If you're not using worldcams and do not have problems with the license, you can stay on the version .15 
Wait for version .17, it will be improved ActiveZoom functionality.


-------------
Nick B.
Ezdok Software


Posted By: JUAN86270
Date Posted: July-19-2018 at 10:23am
Re install the full program now I have the version p3d v4.3 unfortunately I returned to version P3D v4.2 so that my camera could work perfectly, until the team can find a stable solution
or try to find another similar program that works with version 4.3


-------------
HOBBIE AVIATION PASION


Posted By: Nickbe
Date Posted: July-19-2018 at 11:16am
Originally posted by JUAN86270 JUAN86270 wrote:

Re install the full program now I have the version p3d v4.3 unfortunately I returned to version P3D v4.2 so that my camera could work perfectly, until the team can find a stable solution
or try to find another similar program that works with version 4.3


It is not clear what the problem is with P3D 4.3. If you installed EZCA version 2.7.0.16 and the world camera didn't work correctly, you can always write to support and this problem will be solved individually.

If some other program will make your life better than Ezca, it is always your choice.
But we always try to solve user problems.
To contact support simply fill out the form at the bottom of the page:
http://ezdok-camera.com/troubleshooting" rel="nofollow - http://ezdok-camera.com/troubleshooting

With best wishes.


-------------
Nick B.
Ezdok Software


Posted By: webestereo
Date Posted: July-19-2018 at 1:30pm
+1 EZCA - F1 Customer service is good like no other in the FS Community.  Think about it! Thumbs Up

BTW, no problems with 2.7.0.16 so far.  I havent tested the World camera, but i will after my long haul. 

Happy Flying Beer


-------------


Posted By: Guyphil
Date Posted: July-20-2018 at 3:58am
Hi, for P3DV4.3 i use the version 2.7.0.10 since it released with no issue and works great, so do you think it is necessary to update to the latest version 2.7.0.16 ? Thank you :)


Posted By: Nickbe
Date Posted: July-20-2018 at 4:15am
Originally posted by Guyphil Guyphil wrote:

Hi, for P3DV4.3 i use the version 2.7.0.10 since it released with no issue and works great, so do you think it is necessary to update to the latest version 2.7.0.16 ? Thank you :)


Hi!
In version 2.7.0.16 fixed bug not allowing to maintain the position of world camera. In addition, many users of version 2.7.0.10 had problems with license confirmation.
If You are still running well and you don't use a world camera, not necessary to update, soon there will be a new version 2.7.0.17. In this version ActiveZoom mode will be extended.


-------------
Nick B.
Ezdok Software


Posted By: Guyphil
Date Posted: July-20-2018 at 4:37am
Perfect, thank you Nickbe  Smile


Posted By: jcsemedo
Date Posted: July-20-2018 at 8:02am
Hi Sirs,

Just downloaded the last version EZCA 2.7.0.16

Updated and no results... The zoom problem still there.

Just in case, I removed the application, erased all the usual folders, and made a fresh install.

No way, the same problem with the zoom thing.

Hope you can solve it....

Thanks,

jc 


Posted By: Nickbe
Date Posted: July-21-2018 at 8:41pm
Hi All!

New build 2.7.0.17.

[fixed] EZCA compatibility with the latest version of Active Sky for P3D4.3 has been restored. Now the turbulence is transferred from Activesky good right.


https://drive.google.com/file/d/1ccgUXnC_RZ5Hz4oiZ3KW3Qr_BJGTNBI_/view" rel="nofollow - Download 2.7.0.17

Sorry, Active ZOOM mode for external cameras has not been extended yet.
We plan to do this in the next releases.

In any case, don't forget that Zoom using the plus and minus keys still works!


-------------
Nick B.
Ezdok Software


Posted By: supersym
Date Posted: July-23-2018 at 7:52am
Hi,
I've still the same licence error with the 2.7.0.16


Posted By: Nickbe
Date Posted: July-23-2018 at 9:21am
Originally posted by supersym supersym wrote:

Hi,
I've still the same licence error with the 2.7.0.16


Hi!
As far as I know, this problem has been solved for a long time.
The right solution for you, write to our support team. This must be solved individually. Fill out the form at the bottom of the page:
http://ezdok-camera.com/troubleshooting" rel="nofollow - http://ezdok-camera.com/troubleshooting


-------------
Nick B.
Ezdok Software


Posted By: GeorgiosGiannoukos
Date Posted: July-25-2018 at 7:55am
Hi, please help with Ezdok version 2.7.0.16 for P3d 4.3.
While going from VC view to external and versus view, there is a black screen pause and the FPS drops and rise again, very strange.
Please help me
George


Posted By: Nickbe
Date Posted: July-26-2018 at 3:15am
Originally posted by GeorgiosGiannoukos GeorgiosGiannoukos wrote:

Hi, please help with Ezdok version 2.7.0.16 for P3d 4.3.
While going from VC view to external and versus view, there is a black screen pause and the FPS drops and rise again, very strange.
Please help me
George


George, hi!
This problem should be solved individually. Please forward your question to our support team.
Fill out the form at the bottom of the page:
http://www.ezdok-camera.com/troubleshooting" rel="nofollow - http://www.ezdok-camera.com/troubleshooting


-------------
Nick B.
Ezdok Software


Posted By: supersym
Date Posted: July-27-2018 at 7:51am
Originally posted by supersym supersym wrote:

Hi,
I've still the same licence error with the 2.7.0.16

As said by the team support, reinstalling ezca 2 and updated after that, all seems to be ok Smile


Posted By: Ioan92
Date Posted: July-30-2018 at 9:22am
Experienced a new issue today: 777 was shaking as if it was in the grass instead of tarmac. Not sure what caused it...


Posted By: Nickbe
Date Posted: July-31-2018 at 11:30am
Originally posted by Ioan92 Ioan92 wrote:

Experienced a new issue today: 777 was shaking as if it was in the grass instead of tarmac. Not sure what caused it...


Hi!
At some airports, the surface type may not be set correctly. In this case, the behavior of the aircraft on the ground may not be similar to reality. See what type of surface is listed as "Surface source".
In either case, to reduce the impact of the ground on the aircraft's shaking when ground roll, reduce the Surface: RIGID value. If this value is zero, there will be no shaking.




-------------
Nick B.
Ezdok Software


Posted By: webestereo
Date Posted: August-02-2018 at 10:05pm
Im having that issue....  The aircrafts start jumping like a horse upon taxiing from the gate...  If you use Slew Mode On and off, the effect dissapears.....weird....

Another thing:   It is not possible to use GSX customization when EZCA enabled, it just wont start.   I had to close EZCA so the function of vehicles customization can be used from GSX.     In the other hand, some times GSX works, sometimes not and might be related to the EZCA given my last results on the customization issue.

For review...



-------------


Posted By: Ioan92
Date Posted: August-05-2018 at 4:28pm
Surface listed was correct, asphalt.

Even setting it to 0.1 the shaking was still rather extreme. Slewing has no effect on my side (on/off) but will work if I change altitude with it.

I found that our at EDDM after testing it up. Sometimes the shake was normal, other times it was not. This is a new bug that needs fixing. Problem also occurred at EHAM and OMDB with the 77W, PMDG.


Posted By: Ioan92
Date Posted: August-05-2018 at 4:29pm
I want to add that restarting EZCA seems to mitigate the issue temporarily. Something is definitely wrong with the ground shaking.


Posted By: Nickbe
Date Posted: August-06-2018 at 2:16am
Originally posted by Ioan92 Ioan92 wrote:

I want to add that restarting EZCA seems to mitigate the issue temporarily. Something is definitely wrong with the ground shaking.


Hi!
Look in the PMDG settings (CDU) does it have built-in shaking the 777? (747 definitely has its own shaking). There may be a conflict of EZCA and PMDG shaking.
Also, try to completely disable the option "Fuselage Shaking" in EZCA.
I don't have a PMDG777 so I can't check it myself.


-------------
Nick B.
Ezdok Software


Posted By: Ioan92
Date Posted: August-06-2018 at 7:04am
No shake on 777, no shake on 737. Only on 747.
Fuselage shaking is always off because it interferes with the flight model so I don't want that at all.

EZCA shaking and 747 shaking is fine btw, never noticed a problem. They complement each other nicely.




Posted By: penta_a
Date Posted: August-06-2018 at 7:10am
I have a weird problem with EZCA 2.7 latest builds and P3D V4.3, my computer freezes after  starting a flight, it takes about 10 to 30 min max to cause computer to freeze, I still can see hard disk LED blinking, but screen and audio are frozen, I have to press computer reset button to get out of this situation, it happens only if I use EZCA, I didn't see any complaint from any one in here about this problem, it could be isolated issue.

I have to mention that I'm using Windows 10 insider builds, I have tested it on the last 4 builds and problem still exist.

another note, I'm using the other camera software from competition with no issues waiting for a fix for EZCA or Windows 10 maybe.

Ali A.


Posted By: BrianT
Date Posted: August-11-2018 at 2:06pm
Guys I'm running the 2.7.0.17 version and more often than not I get the "resh.exe can not initialize.EZ will close. contact support" message.

I have all of the exe's in the C:\Program Files (x86)\EZCA2 folder set to run as admin as well as p3dv4.3 (29.25520) which is on an m2 used solely for P3d.

I have uninstalled and reinstalled both EZCA and even a full uninstall and re-install of P3d but still I get this.
Whilst running the exe again is an option (and that doesn't always work) I'd rather get it sorted so that it loads reliably. I also have all antivirus and firewall switched off. 

I did do a search for Resh and it only came back with 2 hit's neither of which were this issue.

Any ideas from the great minds out there?




-------------
Regards
Brian




Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net