Print Page | Close Window

EZCA 2.5 beta (P3D4 / P3D3 and FSX) HERE !..

Printed From: SimForums.com
Category: Flight One Partner Forums
Forum Name: EZdok Beta Forum
Forum Description: For new builds, ideas, and testing.
URL: https://www.simforums.com/forums/forum_posts.asp?TID=58324
Printed Date: December-10-2018 at 4:01pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: EZCA 2.5 beta (P3D4 / P3D3 and FSX) HERE !..
Posted By: Marniftarr
Subject: EZCA 2.5 beta (P3D4 / P3D3 and FSX) HERE !..
Date Posted: June-09-2017 at 5:43am
Update. 
Latest version for betatest - 2.5 Build 21

This  version is compatible only with Windows 64. For windows 32 platforms there is a previous version of EZ 2.5 which you can download in the other  beta thread in this forum.. 

https://drive.google.com/open?id=0B_JG6jA7vaHgZ1R4WkVSY3BjbVk" rel="nofollow - - Download EZCA V 2.5 build 21... 


Hi , Guys !

This is final version of EZCA for next simulators:
FSX Box.
FSX-Steam edition
Prepar3D V3.xx
Prepar3D V4.0 
This version have limitation in Prepar3D 4.1
Limitation is  - you can not move worldcamera. 
 
All other features  working normally

In the version 4.1 Lockheed Martin fixed a very long-standing error in some simconnect  variables  which Microsoft made in code in 2006 year. This error is inherited by all versions of the simulator since  starting  FSX.

In previous versions of EZ, this error was corrected in the EZ code itself, and if the correction is applied to the corrected version of P3D 4.1, then there will be an "brake" effect on the front wheel of the aircraft.

In 2.5 Build 21, we fixed this problem.  A similar problem arose on A2A aircraft. And probably will arise for other airplanes that used non-standard physics. These problems are personal for each such product and are not associated with the EZCA.

LM also changed the logic of the world camera.
In version 2.5 build 21, you can not move the world camera with the keys. But we will fix this problem in next version 2.6 which release as beta coming soon.

This build have digital signature and have not false-positive reaction of antiviruses. 

If you have Windows10, then probably your Smart Screen will block the files EZCA.EXE and resh.exe
Just open the EZCA.EXE properties and uncheck Run as administrator.

Before update it , make sure that EZCA.exe process is closed.
Also make sure that copied files was owerwritten.


How to install. 

1. Download archive with latest beta . 

2. Replace with owerwrite  all files form this archive to c:\ProgramFiles(86)\ EZCA2 .

3. Add all .EXE files from EZCA2 folder to exclusion list of your antivirus.

4. Run new configure tool , select Prepar3d V4 then reconfigure simulator. 


If you have any difficulties or incomprehensible moments, please describe them here in detail!
Start your  describe with the Windows version, which language pack is installed, the version of the simulator and the name of the antivirus.

What new in 2.5 version here: 








-------------
EZdok software

www.ezdok-camera.com



Replies:
Posted By: jodle
Date Posted: June-09-2017 at 5:53am
Perfect! Thx for update!!!

-------------


Posted By: Marniftarr
Date Posted: June-09-2017 at 6:44am
Guys !  

PLEASE report here is it wotking or not working , because i need to know quantity of downloads and quantity of worked EZ . Report here even it is working perfectly.


-------------
EZdok software

www.ezdok-camera.com


Posted By: aeromaks
Date Posted: June-09-2017 at 6:59am
Hi Marniftarr,

thank you very much for this release.
Installed it in Prepar3d v4 and I'm going to test it with PMDG 747v3 in flight. For now it works perfectly well (I'm still in preflight phase in UUEE) except one issue I got. When I'm switching views in VC with assigned keys my display blinking with the black frame. I will try to record video. When I'm switching VC views using UI there is no blinking. I'm Russian speaking user so if you want to discuss this issue or may be ask to test specific items I will glad to assist.


Posted By: Motormike
Date Posted: June-09-2017 at 7:12am
It functions with all Standard Planes without problems, but as soon as i take the A2A C172 and start EZCA the PC gets a Slideshow. E.G. if i klick on options or file it needs 7 to 9s til it opens and if i klick on something there its get even more worse.


Posted By: Nickbe
Date Posted: June-09-2017 at 7:15am
Originally posted by aeromaks aeromaks wrote:

Hi Marniftarr,

thank you very much for this release.
Installed it in Prepar3d v4 and I'm going to test it with PMDG 747v3 in flight. For now it works perfectly well (I'm still in preflight phase in UUEE) except one issue I got. When I'm switching views in VC with assigned keys my display blinking with the black frame. I will try to record video. When I'm switching VC views using UI there is no blinking. I'm Russian speaking user so if you want to discuss this issue or may be ask to test specific items I will glad to assist.

In the program settings, uncheck/check the box with "Hide 2D Pop-Up". Black flares will not. I do not remember exactly the name of this option are not at the computer with P3D4.


-------------
Nick B.
Ezdok Software


Posted By: JerdooFlightX
Date Posted: June-09-2017 at 7:16am
Is the worldcam fully working already?

-------------
http://www.youtube.com/user/JerdooFlightX

i7 4770K OC @ 4.6Ghz Corsair H100i Asus Maximus VII Ranger 16GB Corsair Vengeance Pro 512GB SSD 1TB HDD ASUS GTX 970 4GB Corsair RM850 Corsair Carbide 500R


Posted By: Nickbe
Date Posted: June-09-2017 at 7:23am
Originally posted by JerdooFlightX JerdooFlightX wrote:

Is the worldcam fully working already?


Сheck not only worldcam, but also smooth zoom. It should work. :)


-------------
Nick B.
Ezdok Software


Posted By: TroyaForceOneZ
Date Posted: June-09-2017 at 7:27am
Hi there,
So should i download the old installer first and then copy these files from the archiv into the ezca folder? If somebody has already installed it, it would be nice if u could explain it to me. :)


Posted By: aeromaks
Date Posted: June-09-2017 at 7:31am
Hi Nickbe,

thanks so much for your help! Disabled this option - "Hide 2D panels in VC when camera changed" in General Settings, and now blinking has gone, very smooth transitions.


Posted By: Marniftarr
Date Posted: June-09-2017 at 7:36am
Originally posted by aeromaks aeromaks wrote:

Hi Nickbe,

thanks so much for your help! Disabled this option - "Hide 2D panels in VC when camera changed" in General Settings, and now blinking has gone, very smooth transitions.

The "Blink" it is a not a EZCA problem. You can select other camera via simulator menu without EZ and you will see blinks.

Yes , If you set  Hide 2D panels in VC when camera changed" - the blinks will disabled but in VC only.



-------------
EZdok software

www.ezdok-camera.com


Posted By: Marniftarr
Date Posted: June-09-2017 at 7:38am
Originally posted by TroyaForceOneZ TroyaForceOneZ wrote:

Hi there,
So should i download the old installer first and then copy these files from the archiv into the ezca folder? If somebody has already installed it, it would be nice if u could explain it to me. :)

 Install original EZCA form Flight1 site , then overwrite files from this beta archive. This is update to latest 2.5 beta version.
No installer needs.


-------------
EZdok software

www.ezdok-camera.com


Posted By: Ifikratis
Date Posted: June-09-2017 at 8:00am
Thank you Marniftarr and all the closed beta team. It works perfectly here! Great job guys!

I also got these black flashes but did what Nickbe suggested and its fine now.

If I find something I'll report it here. Again, thank you so much!


Posted By: Nickbe
Date Posted: June-09-2017 at 8:01am
Originally posted by Motormike Motormike wrote:

It functions with all Standard Planes without problems, but as soon as i take the A2A C172 and start EZCA the PC gets a Slideshow. E.G. if i klick on options or file it needs 7 to 9s til it opens and if i klick on something there its get even more worse.


A2A C172 appeared to P3D4 recently. We have not tested it. Thanks for the info, will try to find the cause.


-------------
Nick B.
Ezdok Software


Posted By: aeromaks
Date Posted: June-09-2017 at 8:06am
Is there a way to disable temporarily EZCA? I mean some way so it would not load with the sim. Need some testing, I see some strange behaviour with PMDG 747v3.


Posted By: Nickbe
Date Posted: June-09-2017 at 8:22am
Originally posted by aeromaks aeromaks wrote:

Is there a way to disable temporarily EZCA? I mean some way so it would not load with the sim. Need some testing, I see some strange behaviour with PMDG 747v3.

It can help the "global disable"?


-------------
Nick B.
Ezdok Software


Posted By: Johnbla
Date Posted: June-09-2017 at 8:37am
Originally posted by Nickbe Nickbe wrote:

[QUOTE=Motormike]It functions with all Standard Planes without problems, but as soon as i take the A2A C172 and start EZCA the PC gets a Slideshow. E.G. if i klick on options or file it needs 7 to 9s til it opens and if i klick on something there its get even more worse.


This happens for me on the ACA C172 as well as the Milvz Beaver. It freezes my whole system.
John


Posted By: aeromaks
Date Posted: June-09-2017 at 8:40am
Yeh I tried this but the launcher itself starting anyway. 
The issue is that after powering aircraft I see engine number 1 strange indications (N1, N2 rotation, EGT, oil temperature), I've attached screenshot so you can see. I didn't noticed such behaviour before installing EZCA.

I already have tried to disable all Fuselage effects but have no luck. So I decided to remove EZCA from PC. After that the issue has gone. But I will test some more time and also will try to reinstall EZCA.


Posted By: aeromaks
Date Posted: June-09-2017 at 9:07am
Guys,

I solved this problem :))). Well it's actually me Embarrassed who assigned CTRL+E to open EZCA UI and didn't check that by default this key combination assigned on engine autostart in Prepar3d. Sorry for disinformation.



Posted By: solentlfyer
Date Posted: June-09-2017 at 9:13am
Originally posted by Johnbla Johnbla wrote:

Originally posted by Nickbe Nickbe wrote:

[QUOTE=Motormike]It functions with all Standard Planes without problems, but as soon as i take the A2A C172 and start EZCA the PC gets a Slideshow. E.G. if i klick on options or file it needs 7 to 9s til it opens and if i klick on something there its get even more worse.


This happens for me on the ACA C172 as well as the Milvz Beaver. It freezes my whole system.
John

This happens for me on the PMDG 747 v3 - as soon as I click on Options everything freezes. Default aircraft seem fine and the A2A C172 is also good.

Dennis


Posted By: aeromaks
Date Posted: June-09-2017 at 9:22am
Originally posted by Nickbe Nickbe wrote:

Originally posted by JerdooFlightX JerdooFlightX wrote:

Is the worldcam fully working already?


Сheck not only worldcam, but also smooth zoom. It should work. :)

Could you please describe how to use smooth zoom? Is there possibility in EZDOK to zoom with mouse wheel?


Posted By: drayton_k
Date Posted: June-09-2017 at 9:22am
Works perfectly for me. Thanks for the update


Posted By: TroyaForceOneZ
Date Posted: June-09-2017 at 9:33am
Hey guys,
I dont know if that is just coincidence but soon after i installed ezdok for p3dv4 my joystick started freaking out. What i mean by that is that after loading the plane ( pmdg 747 ) the yoke is to the left ( 90 degrees ) although i am not moving my joystick. When i start moving it, it begins to jitter hardcore and wont stop.


Posted By: Ifikratis
Date Posted: June-09-2017 at 9:44am
Originally posted by TroyaForceOneZ TroyaForceOneZ wrote:

Hey guys,
I dont know if that is just coincidence but soon after i installed ezdok for p3dv4 my joystick started freaking out. What i mean by that is that after loading the plane ( pmdg 747 ) the yoke is to the left ( 90 degrees ) although i am not moving my joystick. When i start moving it, it begins to jitter hardcore and wont stop.


It should be something else. I loaded the PMDG 747 in P3D v4 after installing EZdok and the controls were working fine.


Posted By: solentlfyer
Date Posted: June-09-2017 at 9:47am
One further thing I've noticed - when using default aircraft or A2A C172, Task Manager is showing EZCA using 0.5% - 1.5% CPU. When I load the PMDG 747 v3, the EZCA CPU figure jumps to nearly 20% and everything in the sim becomes very laggy. EZCA menus also freeze completely as mentioned previously.

Dennis


Posted By: MatthiasKNU
Date Posted: June-09-2017 at 9:48am
Another problem from my side:

After replacing the new EZCA files and running the Config Tool (with admin rights) to reconfigure P3Dv4 my cameras.cfg inside the Users\AppData\Roaming folder only contains the 3 EZCA entries. The P3D-Default entries are missing, so the Default views are all missing.

I could not find a backup of this file.

What can I do to get the P3D-Default Views back?
Thank you in advance!


Posted By: Nickbe
Date Posted: June-09-2017 at 10:00am
Originally posted by aeromaks aeromaks wrote:

Could you please describe how to use smooth zoom? Is there possibility in EZDOK to zoom with mouse wheel?


If two cameras have different zoom setting (e.g., 0.50 zoom on one camera to another - 0.30), switching from one camera to another is smooth.


-------------
Nick B.
Ezdok Software


Posted By: biker57
Date Posted: June-09-2017 at 10:18am

I can confirm smooth zoom works on my P3d v4 - tested on Maule with several views at different zoom levels - zoom and transmission between views is SMOOTH

world camera also works provided I click on VC after world cam setup and then update camera set - if not done changes to World camera view NOT saved

However I also have the same problem with Pmdg 747 - and several payware/freeware
compatible aircraft

to show why - see pic   - note ezca.exe CPU usage is HIGH 12.0% - ezdok VERY slow


in pic below native p3d v4 planes and several payware/freeware - ezca.exe CPU usage is normal under 1%



-------------
Pete


Posted By: Ifikratis
Date Posted: June-09-2017 at 10:31am
Originally posted by solentlfyer solentlfyer wrote:

One further thing I've noticed - when using default aircraft or A2A C172, Task Manager is showing EZCA using 0.5% - 1.5% CPU. When I load the PMDG 747 v3, the EZCA CPU figure jumps to nearly 20% and everything in the sim becomes very laggy. EZCA menus also freeze completely as mentioned previously.

Dennis



Should be something else. In my case EZCA uses ~1.5% if I have the default aircraft or the PMDG 747 v3.


Posted By: Bentree
Date Posted: June-09-2017 at 10:39am
Installed and tested, works flawlessly with the PMDG B744 and Real Air Turbine Duke.

It even took over the camera settings out of P3Dv3.4

There was a short blink switching camera's, but that was due to the fact i had setup some camera views in the sim to work with my PFC Column. Deleting those solved it.

Thanks for this compatible Beta program..... i missed EZDoc a lot while flying P3Dv4.

oh....i didn't run the configure tool though, just startup P3Dv4 and run EZDoc Beta.

regards,
Ben


Posted By: hvw
Date Posted: June-09-2017 at 10:52am
Works perfectly for me, so far. Will test again after PMDG has released their B737 NGX


Posted By: bursco
Date Posted: June-09-2017 at 10:57am
when I load p3d4 or p3d3 and then run ezdoc - the screen turns to black when ezdoc is initiated. used config on v3 and v4 when it ran.
stop ezdoc running and cockpit vc comes back using change view.
In window mode always - have reinstalled but no luck.

Denis B


Posted By: Nickbe
Date Posted: June-09-2017 at 11:29am
Repeat:
If you have any difficulties or incomprehensible moments, please describe them here in detail!
Start your  describe with the Windows version, which language pack is installed, the version of the simulator and the name of the antivirus.


-------------
Nick B.
Ezdok Software


Posted By: b200fo
Date Posted: June-09-2017 at 12:30pm
Originally posted by Nickbe Nickbe wrote:

Repeat:
If you have any difficulties or incomprehensible moments, please describe them here in detail!
Start your  describe with the Windows version, which language pack is installed, the version of the simulator and the name of the antivirus.

I get very bad performance. Lag on the EZdok studio and it makes my P3Dv4 lag and Windows lag. I have Windows 10 Professional, no anti virus, English language. 

I press FILE. and it takes 10 seconds to open the drop down menu. I press import camera set, and nothing happens. it freezes for 10 more seconds all of Windows. The new window to select a set to import never opens. 

No new window opens. Any option freezes I try OPTIONS... General Settings... freeze when clicking on it and no window opens.

I have the exe's set run as administrator in their properties tab. 


Posted By: willard
Date Posted: June-09-2017 at 12:48pm
same with default F22 - ezca takes approx 20% of cpu power (and I have 6600k @4.5ghz)
dino's f14, default a36  - 6% cpu in VC and 2.5% spot.
default f35 24-25% in VC !!!and sim paused!



Posted By: b200fo
Date Posted: June-09-2017 at 12:58pm
I fixed by changing process priority in the ezdok options to NORMAL from REALTIME. Although that fixes only one time. Starting in a new aircraft it happens again with poor performance. I have one simconnect installed v 10.0.61259.0. Additionally EZDok forces my start menu to stay visible with P3Dv4 in full screen mode.


Posted By: biker57
Date Posted: June-09-2017 at 1:16pm
UPDATE

windows 10 pro 64bit
Prepar3d V3 and v4 installed
Anti virus - windows defender - ezdok and sim files excluded

I RE-INSTALLED THE pmdg 747 qos IN both v3 AND v4 - ACTIVIATED IN v3

THEN RAN v4 - Now the 747 is working well with Ezdok in BOTH V3/v4 - no LAG whatsoever
this appears to be a PMDG issue not an ezdok issue

also

none of dino's freeware work without ezdok lagging - they work fine if ezdok
is not started

all P3d native planes (including the F22 and a36) and the A2a Cessna work with no lag ***** strike that *** there are several default such as the F16 and choppers that are laggy too

edit --- did a full ezdok re-install of V2 then updates to the beta to re-test - same results found no fix !!!

Update 2

replaced the licence file by doing a fresh install using the flight1 wrapper
then updated to the beta - still no fix

then tried importing profiles for aircraft from V3 into same aircraft in V4
no fix


I have had enough for to=day - my head hurts - but willing to stick with Ezdok as it is a great program and some planes do work very well in v4




-------------
Pete


Posted By: b200fo
Date Posted: June-09-2017 at 1:21pm
I imported an ezdok camera set from the ezdok website for the Milviz Baron to just get a set for the A2A C172 and changed the views to my liking. But the external view, the keyboard arrow keys do not correspond to forward back left right it is switched. Changing to external view I do not get sounds for external views it still plays sounds like I am in the cockpit. I must press S to use the default P3D view system to get an external view with external sounds.

My performance is still bad my FPS is 20 when it should be locked at 30, but the freezing and unable to access menus is fixed when I first start and global disable ezdok then global enable after having set process affinity to normal.


Posted By: planenut
Date Posted: June-09-2017 at 1:22pm
Hate to be the village idiot here but I can't figure out how to transfer, copy or whatever I have to do to install these files. In other words what procedure do I have to follow to replace and overwrite the files in
EZCA2 folder. Thanks for any guidance.

Jim

-------------
Jim Allen


Posted By: MarioB
Date Posted: June-09-2017 at 1:28pm
Installed with no issues. Many thanks!

-------------
P3Dv3, Windows 10, i7 3770K, GTX 970 FTW, Asus P8z77 -V PRO, Samsung SSD 830 x 2, 750W PS, 24" monitors x 3. ASN / EFB / PROATC-X on client PC


Posted By: b200fo
Date Posted: June-09-2017 at 1:32pm
Originally posted by planenut planenut wrote:

Hate to be the village idiot here but I can't figure out how to transfer, copy or whatever I have to do to install these files. In other words what procedure do I have to follow to replace and overwrite the files in
EZCA2 folder. Thanks for any guidance.

Jim


If you have ezdok v2 installed download the linked files and unzip them to the program files\ezdok folder that ezdok is installed overwriting the files then run the config exe


Posted By: drayton_k
Date Posted: June-09-2017 at 2:20pm
Everything fine under P3DV4 using the PMDG 747 V2

However I have just tested again in P3D V3 and I had to kill the EZCA process as it made the sim run really slowly, framerates dropped down to 2fps at times and there were issues operating everything. Once I ran the old version 2.1.0.10 again, all was fine.

Using Windows 7 64 Bit and PMDG 737 NGX in V3


Posted By: Barnes
Date Posted: June-09-2017 at 2:45pm
Testing with the default aircraft, EZdok seems to be working well for me in P3Dv4. CPU usage seems a bit high (2.5-4% with F-22) compared to what I remember in P3Dv3. 

BTW - I have also tried starting EZdok by using the add-on.xml method instead of using an entry in exe.xml and it works without any issues. 


Posted By: stripealipe
Date Posted: June-09-2017 at 3:04pm
Working fine on my Windows 10 64bit install. I've only tried briefly with a couple of stock planes, and then mostly with the Aerosoft Twin Otter. So nice to have EZdok back in V4!

It copied the default cameras for the aircraft in nicely and assigned suitable effects which was very nice indeed. I tweaked a couple of zooms for pilot and co-pilot and then setup some outside observer cams, and wow, these are truly epic!

Will report back with any funny goings on, but all cool so far, thanks.


-------------
Asus P9X79 Pro - Intel 3930K @ 4.4GHz - MSI GTX 1080ti GamingX - ORBX


Posted By: eandar
Date Posted: June-09-2017 at 3:21pm

















So far its working in prepar3d 4. but why does it make my plane wobble left and right when i'am sitting still? it stops when i disable it.

















Posted By: eandar
Date Posted: June-09-2017 at 3:34pm
Let you know when i use the new ezca 2 in prepar3d 4 my plane rocks left and right all the time on runway. I have a2a 172 trainer.


Posted By: Bentree
Date Posted: June-09-2017 at 3:35pm
Jim,

I didn't overwrite files, just place the downloaded files in some empty directory and start ezca.exe whenever you loaded up P3Dv4 and it works.

Kind regards,
Ben


Posted By: BushFlyer
Date Posted: June-09-2017 at 3:43pm
Not working for me, it runs totally unresponsive.. unable to use the sim and the EZCA interface is completely unusable, it's basically lagging so hard that it takes 30 seconds to enable/disable any of the effects. It also reduces P3D down to a slideshow. Have to CTRL-ALT-DEL to stop it.

Windows 10 P3D 4.0.


Posted By: Marniftarr
Date Posted: June-09-2017 at 4:12pm
Guys, I read all the pages. There is one common problem - EZ does not work with PMDGs and does not work with A2A aircraft from some users. From the side of the code it is the same EZ version 2.5 for 32 bit P3D v3 only some functions have been rendered in a separate process resh.exe. These are completely isolated processes, so there is no difference in the performance of EZ compared to 2.5 32bit.
Probably the reason in the fast  adapted PMDG aircraft from developers side.. This requires a deep analysis than I'm doing right now.
Probably P4 is still raw. There is a problem of running Prepar v4 if some USB input devices are connected to the PC. I can  not run Prepar V4 if the Nostromo Razer game pad is connected. Ie P4 itself is still raw and will be repeatedly optimized.
Before fixing the problems which you told, it needs to be identified and thoroughly examined, only after that I rework the code.
Therefore, I can not fix these problems right now, since this will also require fixing the P3D itself (probably expecting a new version), as well as corrections from PMDG, A2A  are likely to be required.
One way or another I am with you and are now working on studying these problems that you described.
Small request. When writing about a problem, be sure to describe the version of the system, the name of the antivirus, because it was noticed that some antiviruses like Defender or Nod32 or AVAST block the Simconnect operation between EZ and the simulator.
If I find a solution to these problems these days, I will immediately release the next build.


====



-------------
EZdok software

www.ezdok-camera.com


Posted By: Marniftarr
Date Posted: June-09-2017 at 4:19pm
It seems I found the reason for the large CPU load.
There is a heavenly flaw in the automatic loading of cameras by default for some aircraft, if the camera-set for this aircraft is no exists. EZCA now always loads the built-in default cameras if there is no camera set.
To test my guess, load Submarin Ohio Class - for the submarine there will be no camera-set and EZCA will try to download the built-in cameras and hang on the big CPU load.

Everyone check this . If it is, until Monday I will try to fix this problem.


A temporary solution for those who EZ load  a lot of CPU and freeze.
In spite of the strongly inhibited interface, try - File - Update camera set. EZCA will create a camera set and after rebooting will see that the camera set exists and will not use the automatic loading of cameras by default. It worked for me.
But this is certainly a temporary solution.



-------------
EZdok software

www.ezdok-camera.com


Posted By: b200fo
Date Posted: June-09-2017 at 4:46pm
Originally posted by Marniftarr Marniftarr wrote:

It seems I found the reason for the large CPU load.
There is a heavenly flaw in the automatic loading of cameras by default for some aircraft, if the camera-set for this aircraft is no exists. EZCA now always loads the built-in default cameras if there is no camera set.
To test my guess, load Submarin Ohio Class - for the submarine there will be no camera-set and EZCA will try to download the built-in cameras and hang on the big CPU load.

Everyone check this . If it is, until Monday I will try to fix this problem.


A temporary solution for those who EZ load  a lot of CPU and freeze.
In spite of the strongly inhibited interface, try - File - Update camera set. EZCA will create a camera set and after rebooting will see that the camera set exists and will not use the automatic loading of cameras by default. It worked for me.
But this is certainly a temporary solution.



I almost replied telling you it happens in the default F-22 aircraft not just PMDG and A2A but I see this and I do not have a camera set for the default F-22 yet. I only fly the A2A. I have other issues too I posted above I can repeat them

external cameras in ezdok does not change sound to external sounds I still sound like I am sitting in the cockpit going to an external view

In the external view using arrow keys on keyboard are not mapped to forward back left right each key is mixed up does not correspond to the correct key.

Performance is not as bad even after it loads a saved camera set only if I change the process to normal from a default in the options of realtime.

My windows start menu does not disappear p3dv4 is not going into a true full screen mode is the ezdok process blocking full screen mode?

Thank you


Posted By: biker57
Date Posted: June-09-2017 at 5:00pm

Quote It seems I found the reason for the large CPU load.
There is a heavenly flaw in the automatic loading of cameras by default for some aircraft, if the camera-set for this aircraft is no exists. EZCA now always loads the built-in default cameras if there is no camera set.
To test my guess, load Submarin Ohio Class - for the submarine there will be no camera-set and EZCA will try to download the built-in cameras and hang on the big CPU load.

Everyone check this . If it is, until Monday I will try to fix this problem.


A temporary solution for those who EZ load  a lot of CPU and freeze.
In spite of the strongly inhibited interface, try - File - Update camera set. EZCA will create a camera set and after rebooting will see that the camera set exists and will not use the automatic loading of cameras by default. It worked for me.
But this is certainly a temporary solution.



I have also determined the same reason

many of my freeware /payware have been added to p3d V4 using the LM P3d ADDON.xml option
however this means Ezdok cannot find the AIRCRAFT.CFG file in simobjects/airplanes/

By creating a camera set in p3d v3 with the plane installed as normal in simobjects/../

then run V4 - ezdok recognises that a profile already exists and does not attempt to auto load views from the aircraft.cfg file which in v4 does not exist in simobjects/../ and ezdok works normally

my plan for a temp fix is to alter the addon.xml to exclude the
simobjects/airplane/ folder and place it directly into V4 simobjects/airplanes
for ezdok to see it - not tested - but should work

of course a better solution will be to opt out of the autodetect - unfortunately using update camera set will not work for me, as at that point
after the plane loads ezdok is Already Hung and won't accept the request to update camera set


-------------
Pete


Posted By: Marniftarr
Date Posted: June-09-2017 at 5:09pm
b200fo

I wrote down all the problems that you found.
I will stydy those.. Thanks for watching.



-------------
EZdok software

www.ezdok-camera.com


Posted By: eandar
Date Posted: June-09-2017 at 5:11pm
Marniftarr ezca 2 is working for the most part of different views but the rocking left and right a pain so i went in and diabled the fuselage and it stopped rocking i'am using a2a 172


Posted By: Marniftarr
Date Posted: June-09-2017 at 5:39pm
In A2A, Majestic has its own physics bypassing the simulator. Therefore, for such airplanes, I made switch   off the channel of influence on the fuselage.

-------------
EZdok software

www.ezdok-camera.com


Posted By: Nickbe
Date Posted: June-09-2017 at 5:57pm
Originally posted by Marniftarr Marniftarr wrote:


A temporary solution for those who EZ load  a lot of CPU and freeze.
In spite of the strongly inhibited interface, try - File - Update camera set. EZCA will create a camera set and after rebooting will see that the camera set exists and will not use the automatic loading of cameras by default. It worked for me.
But this is certainly a temporary solution.



A simple temporary solution to create a set of "Update Camera Set":

in windowed mode the P3D menu
Add-ons - Ezdok camera addon - Show studio.

Then, just close P3D4 - Scenario - Exit. The remaining EZCA main window will no longer slow down after a couple of seconds and you can easily execute "Update Camera Set" and close the program. When you next start P3D4 with the same plane will be fine.


-------------
Nick B.
Ezdok Software


Posted By: solentlfyer
Date Posted: June-09-2017 at 6:20pm
I can confirm the workaround suggested by Marniftarr and Nickbe to execute "Update Camera Set" after closing P3D4 has solved the hanging I was experiencing with the PMDG 747 v3.

The menus in EZCA all now work instantly when this aircraft is loaded and the CPU load for EZCA has returned to normal.

It seems the cause of this problem has now been successfully identified!!

Many thanks,
Dennis


Posted By: simson
Date Posted: June-09-2017 at 7:25pm
Tested in win10 64 German, P3DV4, RealAir Legacy. My own cams were there just like in P3DV3. Also unticked the "Hide 2D panels..." for smooth transitions.

First i thought there was another bug. When i switched to any cam by its defined joybutton and then zoomed in or out with + or - key, then pressed the same joybutton again to get back to its normal cam and zoom factor, this button didn't switch anymore but now zoomed very slowly too. I first solved this by simply switching to another cam and then back to this cam.

But after a restart of P3D everything works flawless now. I can switch to a cam, zoom in or out how i like, press the cam's button again, and am in the cam's default position again. So just like always before. Alright here!

Don't know why this happened after the first boot. Just wanted to let you know.


Posted By: stripealipe
Date Posted: June-09-2017 at 7:57pm
Yeah, actually , following on from Simpson, i had a CTD on first boot. All was fine after that.. Maybe that might point to some initial setup problem?

-------------
Asus P9X79 Pro - Intel 3930K @ 4.4GHz - MSI GTX 1080ti GamingX - ORBX


Posted By: b200fo
Date Posted: June-09-2017 at 8:02pm
I have a smooth transition between camera views except back to the first. It flashes black each time I go back to the main virtual cockpit view I have setup.


Posted By: planenut
Date Posted: June-09-2017 at 10:26pm
This is the problem I am having.

When I click on the download link I get a box labeled 2.5 beta 64 build6.rar. Underneath that label it's repeated (minus the.rar) If I click on that, I get the 5 files. It's at that point that I can't do anything with them. Can't unzip, copy and paste, or move the files. The only options available are select all or print. Just can't proceed beyond that.

Jim

-------------
Jim Allen


Posted By: b200fo
Date Posted: June-09-2017 at 10:40pm
Originally posted by planenut planenut wrote:

This is the problem I am having.

When I click on the download link I get a box labeled 2.5 beta 64 build6.rar. Underneath that label it's repeated (minus the.rar) If I click on that, I get the 5 files. It's at that point that I can't do anything with them. Can't unzip, copy and paste, or move the files. The only options available are select all or print. Just can't proceed beyond that.

Jim


what program are you opening the rar with?


Posted By: scotpat
Date Posted: June-10-2017 at 12:37am
Been using for a short time and working beautifully on first go.
I really like the visual representations of vibrations.

Many thanks for being so quick, without EZCA I just couldn't enjoy the P3D V4 and all it's new features.

It's Christmas come early for me.

Thanks. Big smile


Posted By: ramirez
Date Posted: June-10-2017 at 1:14am
Hello,
it's also not working for me. Tested with C172 A2A and RealAir planes, its make the sim very very laggy. I'm using W7 and i tried with both AV on or off, same result.

Don't know if it's can help, but I also tried with the old 1.18 I was using until now by simply adding the code to exe.xml. It was working but gaving the same result with many lags.

Please update.

EDIT : the tip suggested by Marniftarr and Nickbe works, but i don't myself doing that for every planes.


Posted By: scotpat
Date Posted: June-10-2017 at 1:56am
There are no Realair planes for p3d v4 ?.


Posted By: Nickbe
Date Posted: June-10-2017 at 4:22am
Originally posted by ramirez ramirez wrote:

Hello,
it's also not working for me. Tested with C172 A2A and RealAir planes, its make the sim very very laggy. I'm using W7 and i tried with both AV on or off, same result.

Don't know if it's can help, but I also tried with the old 1.18 I was using until now by simply adding the code to exe.xml. It was working but gaving the same result with many lags.

Please update.

EDIT : the tip suggested by Marniftarr and Nickbe works, but i don't myself doing that for every planes.


Prepar3D v4 is different from v3, how it stores configuration data for the aircraft and cameras. These features are now studied and very soon will be update EZCA 2.5.. which eliminates problems of freezing some aircraft.


-------------
Nick B.
Ezdok Software


Posted By: biker57
Date Posted: June-10-2017 at 4:46am

A combination of the suggested workaround and importing v3 profiles means I now have all my installed planes in P3d v4 working including dino's freeware and lionheart creations classic ga planes -a2a Cessna -pmdg 747 v3 etc

Thank you Marniftarr and the ezdok team - loving v2 I was missing it a lot

looking forward to spending time flying and setting up views over the weekend



Scotpat : the realair duke v2 and legacy v2 work in v4 but not all the sounds are working as the sound gauge file is not v4 compatible



-------------
Pete


Posted By: Alain
Date Posted: June-10-2017 at 6:22am
Hello !
I am new to this Forum and happy to be part of you.
I do not speak English and I write with Google translation.
Here is my question:

I have the version EZCA 1.18.7 for P3Dv3.
With my P3Dv4 I must first install the Ezca 2 version and then apply this method :

---> "1. Download this archive.
https://drive.google.com/openid=0B_JG6jA7vaHgbGxWUV9URzFMNG8" rel="nofollow - https://drive.google.com/openid=0B_JG6jA7vaHgbGxWUV9URzFMNG8

2. Replace with owerwrite all files to this file to c: \ ProgramFiles (86) \ EZCA2.

3. Add all .EXE files from EZCA2 folder to exclude list of your antivirus.

4. Run new configure tool, select Prepar3d V4 then reconfigure simulator."

is it correct ?

Thank you for your help

Alain


Posted By: Nickbe
Date Posted: June-10-2017 at 6:49am
Yes, that's right.

-------------
Nick B.
Ezdok Software


Posted By: Alain
Date Posted: June-10-2017 at 7:47am
Originally posted by Nickbe Nickbe wrote:

Yes, that's right.

Merci Nickbe !


Posted By: Bentree
Date Posted: June-10-2017 at 1:14pm
Hi Guy's, 

I have a question.

EZDoc for P3dv4 works fine for me, but when i start P3dv4 EZDoc starts up together with it automatically.

I don't want that, because when it starts automatically together with P3Dv4, EZdoc is not working properly.
When i start it up after i startup P3Dv4, EZdoc is working just fine.

So to be short, how can i prevent EZdoc from startup up automatically when i startup P3Dv4

Kind regards,
Ben


Posted By: Alain
Date Posted: June-10-2017 at 4:08pm
i have the same problem with EZCA version 1.18.7  and P3DV3...
I will upgrade to version 2, and I hope I do not have this problem yet !!!! (with P3DV4)

Merci


Posted By: Marniftarr
Date Posted: June-10-2017 at 5:22pm
Originally posted by Bentree Bentree wrote:

Hi Guy's, 

I have a question.

EZDoc for P3dv4 works fine for me, but when i start P3dv4 EZDoc starts up together with it automatically.

I don't want that, because when it starts automatically together with P3Dv4, EZdoc is not working properly.
When i start it up after i startup P3Dv4, EZdoc is working just fine.

So to be short, how can i prevent EZdoc from startup up automatically when i startup P3Dv4

Kind regards,
Ben

Tell me , what you mean  "EZdoc is not working properly" if it star together with p3D ?


-------------
EZdok software

www.ezdok-camera.com


Posted By: Bentree
Date Posted: June-10-2017 at 6:11pm
What i mean is EZdoc is not working.

On the tastbar there is the EZdoc icon, when i set my cursor over it....the miniscreen that pops up is blank (white).

When i then click the red "X" in the upper right corner, EZdoc is closing (like it should), when i then start EZdoc by double click the EZdoc shortcut on my desktop it starts up again and then it works (and when i then set my cursor over the EZdoc icon on the taskbar, i see the EZdoc config screen)

So to be short.... i would likt to start EZdoc myself, via the shortcut on my desktop.
In this way EZdoc works right away.

Kind regards,
Ben


Posted By: Marniftarr
Date Posted: June-10-2017 at 6:32pm
Hi all. 
This is EZCA v2.5 build 7.

Probably i fixed interface lags and freezes  if camera-set for current aircraft is not exists.
Now EZCA wiil get cameras from airplane (function is fixed) then automatically  making new  camera-set with imported factory cameras. This is "default camera set" with default Effects. Default camera-set it means that best if you load camera-set from similar aircraft or making it with  effect manager like i explaining in this video 
https://www.youtube.com/watch?v=4UkkvG_2SZc" rel="nofollow - https://www.youtube.com/watch?v=4UkkvG_2SZc

After next launch,  EZCA will get camera-set which made in previous step and will not import default cameras.

https://drive.google.com/open?id=0B_JG6jA7vaHgdzgyRmZMY3FtTjA" rel="nofollow - Download 2.5 build 7 here...

PROCEDURE OF INSTALL like Build6 (Overwrite all .exe  files from archive  to  EZCA2 folder)

For users who have problem with configure tool. 
If you will get cameras.cfg file from P3D V3  then run EZ config tool then configure this file as Prepar4 , this file will empty because any .ini fileas from P3Dv3 version have ANSI codepage , but EZ configure-tool work with Unicode .ini files when you configure this file like Prepar4. 
For fix this problem - 
Delete cameras.cfg file from P3DV4 , then launch Prepar. The Prepar will restore this file as Unicode code page. After this , you can configure simulator with EZ config tool. 








-------------
EZdok software

www.ezdok-camera.com


Posted By: Samson
Date Posted: June-11-2017 at 5:28am
Hi Marniftarr,

unfortunately your provided download-link doesn´t work !
Could you update/change it, please ?

Many thanks.

Regards, Lars


Posted By: Nickbe
Date Posted: June-11-2017 at 5:45am
Checked, for me the link works.

-------------
Nick B.
Ezdok Software


Posted By: Samson
Date Posted: June-11-2017 at 6:07am
Hi Nickbe,

i appologize, you´re right, it actually works, i had to log off my google drive account and was able to download it, while logged in it gave me an "Access-error", very strange.

Thanks anyway.

Regards, Lars


Posted By: Captainwarez
Date Posted: June-11-2017 at 6:23am
I still have issues with A2A C172 external plane sounds non existence and arrow keys to pan plane around appear to be reversed. External camera also seems to put my plane in pitot view?
Using P3D V4
windows 10

-Lee


Posted By: biker57
Date Posted: June-11-2017 at 6:36am

win 10 pro 64 bit
windows defender - ezdok excluded

I have tried the new version

1. it works for aircraft in (sim install folder)/simObjects/airplanes

2. for aircraft in a separate addon folder - it works but see image for error
code - ezdok does NOT fall-over





3. aircraft in (sim install folder)/simObjects/Rotorcraft

additional error appears - but camera views ARE picked up correctly





CLICKING ON BOTH ERROR windows removes them and ezdok works OK




-------------
Pete


Posted By: Marniftarr
Date Posted: June-11-2017 at 7:24am
Originally posted by Captainwarez Captainwarez wrote:

I still have issues with A2A C172 external plane sounds non existence and arrow keys to pan plane around appear to be reversed. External camera also seems to put my plane in pitot view?
Using P3D V4
windows 10

-Lee

I remember it.  But now we fix import cameras function. I can not solving two problems at the same time. There will be a mess.

 


-------------
EZdok software

www.ezdok-camera.com


Posted By: Marniftarr
Date Posted: June-11-2017 at 9:05am
For Biker57

This is new build 8 . 

https://drive.google.com/open?id=0B_JG6jA7vaHgWFp3ei1EWHFhX3c" rel="nofollow - Download here...

I modified algorithms of importing default cameras. 

Now if aircraft.cfg or sim.cfg files are not found for the loaded aircraft, EZ will inform you that these files are not found, and will offer to download cameras through the Tools menu. After that, an empty camera-set with two cameras "Download camera set" will load.
To import factory cameras for such aircrafts-  Open Tolls - Import factory cameras.
EZ will try to find aircraft.cfg again and if not successfully, warns that it is necessary to specify where the aircraft.cfg file lies in the manually mode.
A dialog box appears to select the location of this file.
You need to show not the folder, but the file aircraft.cfg. For some SimObjects, you need to specify the sim.cfg file, but these are very rare objects.

Follow the prompts. Report back, does this mechanism work?




-------------
EZdok software

www.ezdok-camera.com


Posted By: Bentree
Date Posted: June-11-2017 at 9:30am
Originally posted by Bentree Bentree wrote:

What i mean is EZdoc is not working.

On the tastbar there is the EZdoc icon, when i set my cursor over it....the miniscreen that pops up is blank (white).

When i then click the red "X" in the upper right corner, EZdoc is closing (like it should), when i then start EZdoc by double click the EZdoc shortcut on my desktop it starts up again and then it works (and when i then set my cursor over the EZdoc icon on the taskbar, i see the EZdoc config screen)

So to be short.... i would likt to start EZdoc myself, via the shortcut on my desktop.
In this way EZdoc works right away.

Now i overwrite the existing files by the beta files and EZdoc directly starts up o.k. and working together with P3Dv4 startup.

Kind regards,
Ben

Disregard this "EZdoc not working" report.

I found out that i did not overwrite files in my existing EZdoc directory, but just left the new beta files in a seperate directory.

EZdoc started up automatically from the existing EZdoc directory and did not work, after that i closed the program and started up EZdoc from the seperate directory with the beta files.
My bad.

Kind regards,
Ben


Posted By: biker57
Date Posted: June-11-2017 at 9:58am
Update


I installed Build 8

1. locating the aircraft.cfg manually works well






IMPORTANT
2. the popup windows are OK

The pic shows the ONLY window that is in the BACKGROUND





-------------
Pete


Posted By: biker57
Date Posted: June-11-2017 at 10:16am


This is a small request but may be helpful.

Ezdok config looks for the aircraft.cfg to remove any conflicting HotKeySelect entries but cannot do this
For addons to P3d outside the sim install folder

As the user has identified the path manually to add cameras can ezdok perform the check for HotkeySelect conflicts without user Awareness -

I appreciate that few aircraft publishers actually use HotkeySelect -   A2A planes do and I now have to manually
Check for HotkeySelect=4 in aircraft.cfg to make ezdok aircraft views work correctly

A reload of the plane in-sim is needed to allow the altered aircraft.cfg to be read by the sim correctly so a popup might be needed stating aircraft reload from the select menu




-------------
Pete


Posted By: Marniftarr
Date Posted: June-11-2017 at 10:30am
Ezdok config looks for the aircraft.cfg to remove any conflicting HotKeySelect entries but cannot do this
For addons to P3d outside the sim install folder 
===
I'll search way  how to make an automatic search for such addons in the configure tool.
But it seems to me that it is necessary to ask the user if other addons (planes) are installed outside the SimObjects folder?
If so, the user manually assigns a folder for such aircraft. EZ will automatically scan inside in  these folders to resolve HotkeySelect conflicts.
Is this correctly ?



-------------
EZdok software

www.ezdok-camera.com


Posted By: Manny
Date Posted: June-11-2017 at 11:10am
The freeze seems to have been solved.. but I have an issue

I like the standard P3D v4 provided fixed spot view. When I hit the S key to rotate view, it seems to get stuck in tower view and doesn't want to get out of there and when I keep holding the S key, it may suddenly let go of the tower view and go to spot or fixed spot view. 

The VC hat switch is horrible now.. It's not precise.. It's jerky, wobbly free floating.. What is the value added for that? Did people complain about the very precise hat switch within VC? EZDOK is going through the NEW COKE moment! Why go mess with something the fans of  EZDOKs were used to? Add new features if you want..but don't take away the basics we were used to. Sigh! Thjis is the same reason, I used to delete or modify the "spot" view of standard P3D to Fixed spot view. 


I have assigned the specific VC view that I like to a button on my yoke within EZCA. How I do that for the standard p3dv4 fixed spot view?

I do not like any of the external camera within EZDOK... almost all of them have this crappy wideangle zoom views which are pretty much useless for me. So I am having to go and deleting all those wide angle views within EZDOK.  


Posted By: Bentree
Date Posted: June-11-2017 at 11:41am
Originally posted by Manny Manny wrote:

The freeze seems to have been solved.. but I have an issue

I like the standard P3D v4 provided fixed spot view. When I hit the S key to rotate view, it seems to get stuck in tower view and doesn't want to get out of there and when I keep holding the S key, it may suddenly let go of the tower view and go to spot or fixed spot view.

I have assigned the specific VC view that I like to a button on my yoke within EZCA. How I do that for the standard p3dv4 fixed spot view?

I do not like any of the external camera within EZDOK... almost all of them have this crappy wideangle zoom views which are pretty much useless for me. So I am having to go and deleting all those wide angle views within EZDOK

I have the same question and would also like a solution for that.

Meanwhile i solve it by pressing 1 or 2 times "S" and thereafter "CTLS-S", that brings me in spot view.

Kind regards,
Ben


Posted By: biker57
Date Posted: June-11-2017 at 11:53am
Originally posted by Marniftarr Marniftarr wrote:

Ezdok config looks for the aircraft.cfg to remove any conflicting HotKeySelect entries but cannot do this
For addons to P3d outside the sim install folder 
===
I'll search way  how to make an automatic search for such addons in the configure tool.
But it seems to me that it is necessary to ask the user if other addons (planes) are installed outside the SimObjects folder?
If so, the user manually assigns a folder for such aircraft. EZ will automatically scan inside in  these folders to resolve HotkeySelect conflicts.
Is this correctly ?



if the user or publisher uses the P3d V4 SDK addon format (not all do)
the addon.xml is placed in documents/Prepar3D v4 Add-ons


MY EXAMPLE - not in c:\drive I don't use this

the file AddOn.cfg in
C:\ProgramData\Lockheed Martin\Prepar3D v4
or
C:\Users\(username)\AppData\Roaming\Lockheed Martin\Prepar3D v4

shows the path to the addon folder for that publisher

[Package.0]
PATH=F:\Prepar3D v4 Add-ons\Dino Cattaneo
ACTIVE=true
REQUIRED=false

the sim reads the file AddON.xml in that location for
SimObjects/airplanes/(Aircraft name folders)


    <AddOn.Component>
        <Category>SimObjects</Category>
        <Path>content\SimObjects\Airplanes</Path>
    </AddOn.Component>


if you can read the path in Addon.cfg and AddOn.xml the combined path is equal to (sim install folder)/SimObjects/Airplanes or Rotorcraft

addon.cfg path to addon planes = F:\Prepar3D v4 Add-ons\Dino Cattaneo
Addon.xml = content\SimObjects\Airplanes

full path F:\Prepar3D v4 Add-ons\Dino Cattaneo\content\SimObjects\Airplanes





If ezdok scans this location as per ezconfig it will find the aircraft.cfg
file for each plane.





I hope this is useful

best regards


-------------
Pete


Posted By: Manny
Date Posted: June-11-2017 at 11:54am
How do I change reference position? I do a tail view within EZDOK but its again one of the ugly wide angle... its been zoomed out. So I zoom back in to a 1.00 zoom. But the position of the camera is inside the aircraft.. I want it to be 500 yards outside the aircraft.


How do I do that? Anyone?
===
What is cameras you mean ? 
Make new "Airctaft" camera near airplane. Then set new ZOOM like 1.0  with + - keyes , then prenn Num2 twice for store this value to camera.
Do not forgot Update camera set for store new values to  data base. 

Guys , please do not discuss here about basic operation with EZ, 
This is beta forum for fixing kernel  problems in EZ like freezes or high CPU usage.



Posted By: Marniftarr
Date Posted: June-11-2017 at 11:55am
I will repeat. The EZCA 2.5 code regarding the camera control logic and (HAT-Switch, Joysticks, keyboard) has not been changed. Everything is the same as in the first release 2.0

If you see a change in the logic of the HAT-switch, this could mean that the logic of the functions is changed in P4. Take off the video, I have to see all these problems live.
Now  the logic of interaction with the simulator is being modernized. Next week, I will tackle the study and elimination of other problems. do not hurry. P4 will also change and more than once, so there is no hurry to invest a lot of work in the version of the simulator (build), which tomorrow will not be relevant.


-------------
EZdok software

www.ezdok-camera.com


Posted By: Manny
Date Posted: June-11-2017 at 12:12pm
Originally posted by Marniftarr Marniftarr wrote:

I will repeat. The EZCA 2.5 code regarding the camera control logic and (HAT-Switch, Joysticks, keyboard) has not been changed. Everything is the same as in the first release 2.0

If you see a change in the logic of the HAT-switch, this could mean that the logic of the functions is changed in P4. 

OK..thats good to know..  

But over a period of time, it would be good (after the v4 has been steadied up..not too many changes) to change  EZDOK to adjust toi the new changes P3D has been making to make it work like it used to? So the user experience remains the same? Smile


Posted By: Manny
Date Posted: June-11-2017 at 1:11pm

This is bad. When I am turning right,, I the pilot am remaining vertical to the Horizon instead of leaning with the aircraft.

How do I fix this. This is bad form of flying! Try going from straight and level flying (in a small GA aircraft) and then do a sudden 90 degree turn.. It's like you are not sitting in your chair with a seat belt, you are floating away in mid air..that's the effect of this.


Posted By: biker57
Date Posted: June-11-2017 at 1:13pm

I have managed to add a video to youtube for build 8

ezdok is stuck until I make the popup window active on screen



-------------
Pete


Posted By: SimDog101
Date Posted: June-11-2017 at 1:24pm
Originally posted by Manny Manny wrote:

The VC hat switch is horrible now.. It's not precise.. It's jerky, wobbly free floating.. What is the value added for that? Did people complain about the very precise hat switch within VC? EZDOK is going through the NEW COKE moment! Why go mess with something the fans of  EZDOKs were used to? Add new features if you want..but don't take away the basics we were used to. Sigh! Thjis is the same reason, I used to delete or modify the "spot" view of standard P3D to Fixed spot view. 

This is bad. When I am turning right,, I the pilot am remaining vertical to the Horizon instead of leaning with the aircraft.

The hat switch operates perfectly for me in version 4... exactly the same as it's always been.  Are you sure you've disabled the hat (as well as 'A', 'S', etc.) within Prepar3D?  It sounds like your view key assignments may be conflicting.

Turn off the "Horizon Hold" option if you don't like that effect.  You may want to review some of the videos for instruction before reporting issues that are not really issues.


Posted By: Manny
Date Posted: June-11-2017 at 1:35pm
I had not disabled any keys in v2 of  EZDOK like I did the old version. 

Are these the videos?

https://www.youtube.com/watch?v=01_WSAaxuS4" rel="nofollow - https://www.youtube.com/watch?v=01_WSAaxuS4

https://www.youtube.com/watch?v=zAJMfTZfcXY" rel="nofollow - https://www.youtube.com/watch?v=zAJMfTZfcXY

Are there more?


Posted By: Manny
Date Posted: June-11-2017 at 1:51pm
OK.. I disabled the S, A, sh*t-A and Shift S and the hat switch from P3D.

This made no difference. and second, when I exist the sim, my settings assignment of button to a camera in EZDOK is not saving for some reason. I have to do this each time.. and for each variation of the aircraft. the Hat switch is not precise..its free form floating. 

The Horizon parameter helped. I simply reduced the the near zero..left a little bit.. so that solved the issue.


Posted By: jodle
Date Posted: June-11-2017 at 3:58pm
Same problem as [Manny]. Trying disabling S, A, shA, shA in EZCA/P3Dv4 without results only external views. Trying with other keys (adding) same problem


-------------


Posted By: Marniftarr
Date Posted: June-11-2017 at 4:14pm
biker57 
Send this aircraft.cfg on support@arcc-pro.com



-------------
EZdok software

www.ezdok-camera.com


Posted By: Terblanche
Date Posted: June-11-2017 at 4:43pm
So happy to have EZDok back in P3D4 ... just two questions:
1. Why is there a flicker when I press a key to change camera? It is as if it blinks?
2. Pressing 'S' also get me stucked in Tower View
=======
All keys for EZDok is disabled in controls. At the moment it is only setup for PMDG B744.
Great work guys and thanks again for the speedy update.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net