Print Page | Close Window

EZdok 2.0 Full Tutorial!

Printed From: SimForums.com
Category: Flight One Partner Forums
Forum Name: EZdok Software
Forum Description: EZdok Forum for EZdok Camera
URL: https://www.simforums.com/forums/forum_posts.asp?TID=57347
Printed Date: April-01-2020 at 7:45pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: EZdok 2.0 Full Tutorial!
Posted By: captfsng
Subject: EZdok 2.0 Full Tutorial!
Date Posted: January-10-2017 at 10:08pm
Good evening everyone,

I have a Tutorial series on the new EZdok 2.0. If you are having issues or if you are new to the software, these could perhaps answer some of your questions. 

Hope this helps,
Vincent







Replies:
Posted By: Marniftarr
Date Posted: January-11-2017 at 8:30am
Very nice job , Vincent !!!!




-------------
EZdok software

www.ezdok-camera.com


Posted By: BrianT
Date Posted: January-11-2017 at 3:41pm
Originally posted by captfsng captfsng wrote:

Good evening everyone,

I have a Tutorial series on the new EZdok 2.0. If you are having issues or if you are new to the software, these could perhaps answer some of your questions. 

Hope this helps,
Vincent

Great job Vincent! now if we can get this stickied at the top of the forum it may cut down on some of the repeat posts.


-------------
Regards
Brian



Posted By: Woc
Date Posted: January-15-2017 at 11:30am
Truly appreciated. Thanks and have a nice flights Cool

-------------
Ivan Lewis


Posted By: Dirk98
Date Posted: February-14-2017 at 2:57pm
How to uninstall the previous version first, please?

Thanks,
Dirk98


Posted By: Marniftarr
Date Posted: February-14-2017 at 5:49pm
Just rename or delete "EZCA" folder. Path for this folder -   ProgramFiles(86)  

-------------
EZdok software

www.ezdok-camera.com


Posted By: Dirk98
Date Posted: February-16-2017 at 3:56pm
Originally posted by Marniftarr Marniftarr wrote:

Just rename or delete "EZCA" folder. Path for this folder -   ProgramFiles(86)  

Is it that simple? How about removing the exe in EXE.xml, and I would guess some more stuff from different places?

Is there any detailed discussion or readme on how to uninstall ver1.8 please?

Thanks,
Dirk98


Posted By: Marniftarr
Date Posted: February-16-2017 at 4:27pm
Installer for V2 version doing next steps in a system:

1. Unpack EZCA2 folder in ProgramFiles(86)
2. Unpack DB2 folder in Rouming folder.
3. Add record to exe.xml (ezlauncher.exe) 
This record is not crossed with ezca.exe (old version)
4. Register components Ezsc.dll and dx8vb.dll for  new path (ProgramFiles(86)\EZCA2

No any other  actions in a system. 

For  disable old version just rename  EZCA folder in ProgramFiles86.

For completely manually  remove old version do next steps:

1. Run configure tool then  Options-->Unregister components.
2. Delete EZCA folder in a ProgramFiles86
3. Delete DB folder in a Rouming\EZCA 
4. Delete record in a exe.xml
5. Delete ezdcam1.lic files in a C:\EZdok Software and C:\Windows .

6...install V2.

If you just rename the old folder EZCA then change the path to ezca.exe -  it just will not start, even if the record into exe.xml remained.












-------------
EZdok software

www.ezdok-camera.com


Posted By: agblesai
Date Posted: February-16-2017 at 11:42pm
Hi I wanted to upgrade ezca v2 but the coupon corrupt when I downloaded it . what should I do ? thanks 


Posted By: Eh5an777
Date Posted: June-30-2017 at 9:24am
Hello,

Firstly, thanks a lot for your great videos on how to setup EZCA. However, I've encountered an issue that I would most appreciate help with. When I bought EZCA 2 (today) it successfully installed the configuration icon on my desktop. It is also the first time I have bought EZCA, therefore I did not think I would need to update anything before I instantly run the application. So, I ran the EZCA configuration tool but it came up with a information notice.

This clearly says: "Before use utility, you should connect to PC all game devices, configure them, make on flight then close a simulator."

And I then just pressed "Yes", it detected my FSX SE. But, it then issued an ERROR saying: "Unable to write..." to the FSX SE location in my disk with one of my aircrafts mentioned.


Any solutions please. Have I done something wrong?

Many thanks in advance.


Posted By: nabeel
Date Posted: August-30-2017 at 9:46am
Is there a PDF doc? I hate having to scrolling through videos just to reference something or find. Having a hard copy of something is much more preferable


Posted By: Nickbe
Date Posted: August-30-2017 at 10:36am
Originally posted by nabeel nabeel wrote:

Is there a PDF doc? I hate having to scrolling through videos just to reference something or find. Having a hard copy of something is much more preferable


Manual for version EZCA2.5 in PDF now in the process of writing. I think, in mid/end-September, we will be able to publish it.


-------------
Nick B.
Ezdok Software


Posted By: Nickbe
Date Posted: December-11-2017 at 8:13am
The manual is still in work. Each successive version of Ezca is very different from the previous one, this hampers the creation of the manual. I hope with the release of version 2.7, we will have a full user manual. But for now you can all important points to learn from the videos on the channel Marniftarr. If the video is in Russian language, turn on English subtitles.

https://www.youtube.com/user/Marniftarr/videos" rel="nofollow - https://www.youtube.com/user/Marniftarr/videos

-------------
Nick B.
Ezdok Software


Posted By: Omaniac
Date Posted: February-23-2018 at 7:39am
Nice tutorial!
A few comments. The virtual wall is nice to use with TrackIr. It stops you from poking your head through the wall if you lean to the left. That is probably why it lets you through the right wall as you will not be able to get to that position. Unless you move the camera way out of the correct PIC position.
The horizon hold works for me just by pressing the green button.
Nobody seems to be explaining the global camera function. I have no idea what it does. I can disable it, but that just freezes the picture.


Posted By: Nickbe
Date Posted: February-23-2018 at 7:59am
Thank you for your kind words. Please explain what you mean by "global camera function"? Then I will be able to describe the function of which is unclear in more detail.

-------------
Nick B.
Ezdok Software


Posted By: Omaniac
Date Posted: February-23-2018 at 5:31pm
In the P3D add on menu you can select EZdok which splits into Studio and Global (disable). I don't know what this Global function is?


Posted By: Marniftarr
Date Posted: February-24-2018 at 4:49am
Global disable - this option completely bypass EZCA functions but  keyboard will working for switch cameras to Spot or Fly-by or other category (A S  keys).

-------------
EZdok software

www.ezdok-camera.com


Posted By: Omaniac
Date Posted: February-24-2018 at 3:21pm
Thanks!
All it does for me is freeze the picture. I use TrackIr and it also stops working when I hit disable. Don’t know what do do to get it to work in this situation.


Posted By: Marniftarr
Date Posted: February-25-2018 at 4:48am
No no... trackIr will bypassed too.. because absolutely  all functions will disable  during bypass include trackiR .

-------------
EZdok software

www.ezdok-camera.com


Posted By: Omaniac
Date Posted: February-26-2018 at 9:14am
So, is there any way I can stop EZdok from working without stopping TrackIr at the same time?


Posted By: Marniftarr
Date Posted: February-27-2018 at 4:17am
I think not, because I need to leave half of the EZ function working. This contradicts the "Global Disable" ..

-------------
EZdok software

www.ezdok-camera.com



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net