Print Page | Close Window

Moving Gauges in VC 3D Panel

Printed From: SimForums.com
Category: Flight One Partner Forums
Forum Name: FS Panel/Sound Studio Forums
Forum Description: Discussion and support for FS Panel Studio and FS Sound Studio
URL: https://www.simforums.com/forums/forum_posts.asp?TID=56335
Printed Date: November-23-2020 at 2:19pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: Moving Gauges in VC 3D Panel
Posted By: danewatson
Subject: Moving Gauges in VC 3D Panel
Date Posted: August-25-2016 at 1:38am
I have tried everything and exhausted looking through the FSPS Forum and cannot understand how to move (swap) two gauges in the FSX Cessna 172.

1. I would like to simply swap the positions of the Tachometer with the ADF in the VC 3D Panel.

2. I do not see how to access the VC 3D Panel while in FSPS. All I get to see are the 2D Panels

I do own the paid version of FSPS and the Build# is 22900



Replies:
Posted By: Bert Pieke
Date Posted: August-26-2016 at 4:46pm
Why not simply edit the panel.cfg file with Notepad?

For something simple as this, that may well be the easier route..

[VCockpit01]
...
//gauge03=Cessna!, ADF,                            259,283,145,145
gauge03=Cessna172!Tachometer,                      259,283,145,145
...

[VCockpit02]
...
//gauge07=Cessna172!Tachometer,               260,318,143,143
gauge07=Cessna!ADF,                            260,318,143,143
...

-------------
Bert


Posted By: danewatson
Date Posted: August-26-2016 at 5:54pm
Thanks Bert, I actually did that but what I found was that the ADF turn Knob (in the lower left corner of the gauge) did not move over with the ADF after the actual gauges switched positions. So then I looked to see why that would happen but that's when I gave up after trying and trying.

Let me know what you think please.


Posted By: Bert Pieke
Date Posted: August-26-2016 at 6:19pm
You cannot move that knob.. it is part of the 3d model.

FSPS will not help you here.

-------------
Bert


Posted By: danewatson
Date Posted: August-26-2016 at 7:04pm
OK - so that's why.

Thank you so very much Bert for your help.

Oh, one more question (I am new to FSPS) - Does FSPS not show VC 3D Panel? This is what I first started to look into but all I see is the 2D panel for editing.


Posted By: Bert Pieke
Date Posted: August-27-2016 at 12:20am
I am no FSPS expert, so hope for others to jump in..

-------------
Bert


Posted By: Murray
Date Posted: October-27-2016 at 12:58pm
At the begining I dont remember at list 6 or 7 years FSPS was working..I even made a movie in you tube and google about DC3 so you can check out murray ayata DC3 then you have it however??????one week ago everything chance FSPS is not working they dont even answer?
1...Aircrafts which shows on the top second aircraft sign when you click it all your aircraft was opening not any more.. no matter how you try it is not working...so result..they are cutting the branch which they are sitting on it its funy but realy..
retire captain
regard



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net