EZCA 3.1 for P3D v5 here!!! (beta)

I can not access key mapping because the menu is no possible to be visible completely.
.
I can not move it either

I read all of the posts about camera shaking in the VC. When I had this problem earlier in PMDG 737 NGXu I disabled advance mouse control like others and it worked fine. I had to reinstall EZCA and now the cockpit shakes when I move the mouse (without pressing the middle wheel.) When I press the middle wheel, the view moves correctly, but when I let go and move the mouse, it is acting like it wants to pan (as it did in the original VC when I moved the mouse without pressing anything.) However, something is stopping it from panning and so it just shakes the view. I need to disable something, but I am not sure what. Any help would be appreciated.

Thank you.

Same here with the shaking issue a couple o minutes after loading the flight at the gate. The only thing is that when I open the options menu stacks at end of my monitor and not possible to edit, move or close.
Have no idea what to do

Hello, waiting for the compatibility with activesky 7613.

Stay healthy.

Fixed - In all my brilliance, I had somehow managed to tick "mouse look" in FSUIPC. All is well. Smile

Any ideas from anyone?

Latest version installed. I am running Active Sky 7613.

Faulting application name: EZCA.exe, version: 3.1.0.40, time stamp: 0x2a425e19

Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

Exception code: 0xc0000005

Fault offset: 0x15e9405b

Faulting process id: 0x30a8

Faulting application start time: 0x01d6b76b75ee72f0

Faulting application path: C:\Program Files\EZCA3.1\EZCA.exe

Faulting module path: unknown

Report Id: baa910d3-c686-4e2c-bc42-982a8db37d1e

Faulting package full name:

Faulting package-relative application ID:

sportpilot wrote:

Any ideas from anyone?

Latest version installed. I am running Active Sky 7613.

Faulting application name: EZCA.exe, version: 3.1.0.40, time stamp: 0x2a425e19

Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000

Exception code: 0xc0000005

Fault offset: 0x15e9405b

Faulting process id: 0x30a8

Faulting application start time: 0x01d6b76b75ee72f0

Faulting application path: C:\Program Files\EZCA3.1\EZCA.exe

Faulting module path: unknown

Report Id: baa910d3-c686-4e2c-bc42-982a8db37d1e

Faulting package full name:

Faulting package-relative application ID:

Hi All!

We have an assumption that the problems with the hang and the error with P3D5.1 May be related to ActiveSky 7613.

In the next couple of days, we will make compatibility with this version of AS. Little patience.

Hello Nick,

No problem at all. This occurred with both the default Jet and Aerosoft Professional A320. I am using Windows 10 Pro version 20H2.

P3D v5.0 with EZDOK v ...38 and 40. Win10 2004

Any changes made to Active Zoom settings (sensitivity, simple/middle mouse button etc) are not saved and EZDOK always starts with the default values ie Active Zoom off.

Hi All!

We are still investigating some EZCA3.1 errors when working with P3D v5.1.

We are currently investigating issues related to Aerosoft A3XX. The work is ongoing. As soon as there is a positive result, I will immediately inform you here.

Some internal changes in the Prepar3D 5.1 were unexpected for us and require careful study.

Nickbe wrote:

Hi All!

We are still investigating some EZCA3.1 errors when working with P3D v5.1.

We are currently investigating issues related to Aerosoft A3XX. The work is ongoing. As soon as there is a positive result, I will immediately inform you here.

Some internal changes in the Prepar3D 5.1 were unexpected for us and require careful study.

I had that one issue as reported a few posts above but have flown two flights without issue totaling almost 9 hours using the Aerosoft Airbus professional A320, using P3D V5.1, Active Sky 7613. If you need anymore information, please let me know.

Latest build of the

EZCA v.3.1.0.41

Compatible with P3D v5.1 and Active Sky 7613

Download...

Thank you Nickbe. Working for me.

Updated to V 41 - all OK with P3dv5.0 except for the active zoom issue I reported above. in more detail:

Changes made to the Active Zoom section of the Camera Control Panel are saved in the Generals.ini file [I assume this is correct].

However when P3D is restarted. EZDOK v3 does not appear to read that section of the ini file and the Active zoom settings remain at default with both Active Zoom settings off etc.

[of Course EZDOK 2 saved the settings in the file and used the new settings at relauch]

If this is not a bug grateful for any suggestions to sort it out on my system

Many Thanks

OK - reverted back to v38 - I believe the last p3dv5.0 version, and the Camera Control Panel is saving and launching correctly.

So I guess the problem is a minor backward incompatibility between the EZDOK versions for P3d v5.1 and P3D v5.0.

Any news about P3Dv5.1 hotfix?

joemo wrote:

Any news about P3Dv5.1 hotfix?

And new ActiveSky build.

EZCA 3.1.0.41 is compatible with P3D 5.1 hotfix1.

Compatibility with the new ActiveSky build will be available later. Maybe tomorrow.

We checked everything. The latest build EZCA 3.1.0.41 works fine with the P3D 5.1 hotfix and the latest beta Activesky #7628 . No adaptation is required.

Yesterday i made a flight with new version of AS #7633. There was nothing wrong with ezca.

joemo wrote:

Yesterday i made a flight with new version of AS #7633. There was nothing wrong with ezca.

Except that EZCA doesn't connect to ASP3D v7633. Wink

Randy

RRVyper wrote:

joemo wrote:

Yesterday i made a flight with new version of AS #7633. There was nothing wrong with ezca.

Except that EZCA doesn't connect to ASP3D v7633. Wink

Randy

Nickbe wrote:

Build 3.1.0.42

http://ezdok-camera.com/downloads

Thanks @Nickbe,

I'm not sure if it's a typo but just an F.Y.I. the latest version of AS P3D is 7638 not quite as far as yours is listed, and consequently it doesn't detect AS P3D is running.

Thanks,

Hi!

AS very quickly changed from version 7633 to 7638. Possible confusion, we need to check build 42 with AS 7638.

Keeping you on your toes! Wink

Hi Ezdoc Cam Team,

i have a problem after installation 3.1.0.43

I am on P3D V5.1 HF1

ASP3D Version 7639

The last version from Ezdoc was 3.1.41 worked perfect for me.

Today i make the installation from 3.1.0.43

At this time i get crashes from my P3D. Every time when i will change something in the options

the sim crashes.

After this i install back my 3.1.41 and all working perect for me. No crashes

Thanks

Frank from EDDM

f.skywalker wrote:

Hi Ezdoc Cam Team,

i have a problem after installation 3.1.0.43

I am on P3D V5.1 HF1

ASP3D Version 7639

The last version from Ezdoc was 3.1.41 worked perfect for me.

Today i make the installation from 3.1.0.43

At this time i get crashes from my P3D. Every time when i will change something in the options

the sim crashes.

After this i install back my 3.1.41 and all working perect for me. No crashes

Thanks

Frank from EDDM

Hallo Ezdoc Team,

lease can you help me and give me an answer.

Thanks Frank

Now it is working.

Thanks for answer and helping !!!

Frank

AS updated to 7652, and no AS connection with EZCA 3.1.043, can we expect an update soon ?

Many thanks

Julian

P3D F-35B Hover problem with EZdok running P3Dv5

With Ezdok (v3.1.0.43) (previous versions also) running in P3Dv5.1 there is a Hover problem with the P3D default F-35B aircraft.

With the P3D default aircraft F-35B on runway 
with gross weight e.g. 38000 lbs for a hover operation test
parking brake set 
then initiate Hover mode 
the F-35B should initially remain stationary with the parking brake automatically released 
but instead it just starts speeding down the runway

If Ezdok is disabled in the exe.dll (disabled True) then the P3D Hover mode works properly on the next test.


I need to know what to change in the Ezdok options to fix this problem?

Note:
The same Hover problem with P3Dv4.5.14.34698 when using Ezdok v3.0.1.84 and a payware F-35B

vons wrote:

P3D F-35B Hover problem with EZdok running P3Dv5

With Ezdok (v3.1.0.43) (previous versions also) running in P3Dv5.1 there is a Hover problem with the P3D default F-35B aircraft.

With the P3D default aircraft F-35B on runway 
with gross weight e.g. 38000 lbs for a hover operation test
parking brake set 
then initiate Hover mode 
the F-35B should initially remain stationary with the parking brake automatically released 
but instead it just starts speeding down the runway

If Ezdok is disabled in the exe.dll (disabled True) then the P3D Hover mode works properly on the next test.


I need to know what to change in the Ezdok options to fix this problem?

Note:
The same Hover problem with P3Dv4.5.14.34698 when using Ezdok v3.0.1.84 and a payware F-35B

Hi guys !

Today we found the problem described by Mr. Vons.

The problem appeared after recent windows updates.

Description of the problem -

Prepar3D silently crashes during EZCA startup.

We spent several hours looking for the cause and found out that reinstalling simconnect seems to fix this problem.

Take those steps to fix this bug:

1. Close the simulator and all applications associated with it.

2. Open Application Manager and uninstall all versions of Microsoft Simconnect thzt you found in list.

3. Open folder C: \ ProgramFiles \ EZCA3.1 (EZCA3.0) \ and install Simconnect version 10.0.61259.0 installer

4. Open EZCA configure tool -> For advanced users, in the list click on version 10.0.61259.0

5. Close the configure tool.

6. Run the simulator, tell us about the results.

Hello,

Follow up.

This Hover problem has been present for months but I just discovered the apparent cause (Ezdok) now and reported it on this forum.

I have updated Microsoft Updates several times since first noticing the Hover problem and currently at WIN10 Home 20H2 19042.685

In my Windows Programs and Features there is only one Microsoft Simconnect and it is already at that version 10.0.61259.0 (screenshot)?

Should this same version number be OK in my setup?

Vons , I meant CDT for P3D after EZCA launch. This bug arise after latest windows update when P3D use Simconnect 10.0.21659.0 inteface. Several months ago, some users had a similar problem. Reinstall simconnect is fixed this bug. This problem is not related to your problem. Probably I was quick to link these two problems.

About F-35B. I know about this bug. This is a problem on the side of the Simconnect API and cannot be fixed. The problem only arise for this airplane.

Hi,

I have terrible stuttering if i'm press the option Hide cursor when you press the Middle Mouse Button. Fastest Nvidia drivers, prepar3d v5 vanilla no addons. if i untick the option while i'm panning the view no see any stutters, but if i turn on the option, while i'm panning in the airplane seems like stops that microsecond and cause stutters.

Any advice's?

Hello.

I am having issues with zoom level using Ezdok with FSLabs A320. Zoom level won't stay the same every time I start the new flight. It also resets sometimes when I change cameras. It only affects FSLabs A320. I wonder if there is a conflict between Ezdok and FSLabs systems or views. Does anybody who has FSLabs has the same issue? Thanks.