Avidyne not creating .ini file??

Hi all,

I have read through these posts regarding the problems with Avidyne .ini files, however, none have addressed my problem. Hope someone can help.

I have attempted many times to install the Avidyne MFD and PFD into a Carenado Beech Bonanza. I can go through all the procedures as outlined in the instructions, the install, the placement of the PFD and MFD on the panel and save everything. Then I go to the Settings Manager, and the aircraft is not recognized in the aircraft drop down menu.

I then went to the panel folder to look for the Avidyne.ini file, and there isn't one. If I try to fly the aircraft, I receive an error message saying the program cannot locate the .ini file and to use the Settings Manager to install it...but the plane is not there???

Any ideas?

Thanks...

Thank you Paul for taking the time to look into this for me. I have used the program on one other aircraft and it worked fine. I got the .ini file and the panel works great. I just can't get it to work again.

I'll look forward to hearing from you.

Actually Paul, no. I have FSX loaded along with FS9, however, prefer to use FS9.

I installed the Avidyne program listing BOTH versions of FS and indicating the path to each. When I start the Avidyne Configuration Manager, it asks which version I am wanting to install the gauges into. I select FS9 and it takes me to the config page where I can select the aircraft from the list it creates.

I was able to load the gauges, both windowed (on the 2D panel) and embedded into the virtual panel, of my Beech 18 and everything worked great. But when I attempted to load up the gauges into the Carenado Bonanza, I can load the gauges into the 2D but the program fails to create the .ini file. As a result, each time I start FS9, I get a message saying the program unable to locate the .ini file. I went to the panel folder and sure enough...no .ini file. The Beech 18 panel folder has one.

I have looked over the file names, and replaced the space between the words with "_" as was recommended elswhere in this forum but still no .ini file.

Hope this helps with the troubleshooting??

Well, I've only tried the one other aircraft. I'll try loading it into something else and let you know if it works. No I haven't contacted Carenado yet. Last time I contacted their support folks they weren't too helpfull.

Here is my panel.cfg file for the Carenado Bonanza. I noticed that for some reason, the gauge installer utility loaded the AP/FD Switch (Window 8) as the last entry??

// This Panel.cfg file created by FS Panel Studio panel editor utility - http://www.fspanelstudio.com
// Built Sunday, August 29, 2010 at 08:16 FSPS Build:20340

[Window Titles]
Window00=Main
Window01=Yoke
Window02=Radio Stack
Window03=GPS
Window04=Throttle Quadrant
Window05=Big PANEL
Window06=FS Avidyne PFD
Window07=FS Avidyne MFD
Window08=AP_FD_Switch

[VIEWS]
VIEW_FORWARD_WINDOWS=MAIN_PANEL,21,20,RADIO_STACK_PANEL,GPS_PANEL,THROTTLE_PANEL

VIEW_FORWARD_DIR=8.000, 0.000, 0.000

//--------------------------------------------------------
[Window00]
file=panel.bmp
size_mm=1024
window_size_ratio=1.000
position=7
visible=1
ident=MAIN_PANEL
pixel_size=1024,1024

gauge00=BeechV3!Wiskey, 754,182,70,73
gauge01=BeechV5!SWToggle, 758,659,60,56,20
gauge02=BeechV5!Clock, 727,307,72,80
gauge03=BeechV5!SWbeacon, 375,734,25,23
gauge04=BeechV5!SWland, 448,734,25,23
gauge05=BeechV5!SWnav, 400,734,25,23
gauge06=BeechV5!SWpanellight, 545,752,25,23
gauge07=BeechV5!SWpitotheat, 325,734,25,23
gauge08=BeechV5!SWtaxi, 424,734,25,23
gauge09=BeechV5!SWmasterB, 249,733,25,23
gauge10=BeechV5!SWmasterA, 272,733,25,23
gauge11=BeechV1!Flap, 740,729,40,65
gauge12=BeechV3!TempAir, 29,616,79,93
gauge13=BeechVB!Avionics Icon, 444,300,24,23
gauge14=BeechVB!Kneeboard Icon, 469, 300 ,24,23
gauge15=BeechVB!ECU Icon, 494,300,24,23
gauge16=BeechVB!Map Icon, 518,300,25,23
gauge17=BeechVB!Gear Lights, 838,724,45,50
gauge18=BeechVB!Gear In Transition Light, 849,717,20,19
gauge19=BeechVB!Gear Lever, 890,719,40,55
gauge20=BeechV4!CowlFlap, 680,730,36,35
gauge21=BeechV5!SWstrobe, 350,734,25,23
gauge22=BeechV4!TrimE, 624,720,24,49
gauge23=BeechV4!Warning, 466,246,33,10
gauge24=BeechV6!Start, 175,730,40,35
gauge25=BeechV7!ToggleOpen, 543,301,23,22
gauge26=beechV0!Altimetro, 527,583,115,115
gauge27=beechV0!Asi, 254,583,115,115
gauge28=BeechV7!Attitude, 391,583,115,115
gauge29=C441!KX165A Navcom2, 822,398,201,64
gauge30=C441!KR87 ADF, 822,514,200,43
gauge31=C441!KT76C Transponder, 822,559,200,51
gauge32=C441!KAP140 Autopilot, 822,612,200,51
gauge33=C441!KN62A DME, 822,462,200,51
gauge34=C441!KX165A Navcom1, 822,333,200,64
gauge35=C441!Audio Panel, 821,299,200,34
gauge36=BeechV5!SWavionics, 848,681,25,24
gauge37=F1_C172R!NAV1-GPS Switch, 411,301,32,22

//--------------------------------------------------------
[Window01]
file=yoke.bmp
size_mm=1024
position=7
visible=0
ident=20

gauge00=BeechV5!SWToggle, 343,620,80,80,20

//--------------------------------------------------------
[Window02]
Background_color=2,2,2
size_mm=220,393
position=5
visible=0
ident=RADIO_STACK_PANEL
pixel_size=1024,1024

gauge00=C441!Audio Panel, 1,1,217
gauge01=C441!KX165A Navcom1, 0,38,217
gauge02=C441!KX165A Navcom2, 0,107,217
gauge03=C441!KR87 ADF, 0,177,217
gauge04=C441!KN62A DME, 1,224,217
gauge05=C441!KT76C Transponder, 0,281,217
gauge06=C441!KAP140 Autopilot, 0,337,217

//--------------------------------------------------------
[Window03]
Background_color=16,16,16
size_mm=329,272
position=2
visible=0
ident=GPS_PANEL

gauge00=fs9gps!gps_500, 0,0,327,271

//--------------------------------------------------------
[Window04]
file=paneltrole.bmp
size_mm=370,163
window_size_ratio=0.300
position=8
visible=0
ident=THROTTLE_PANEL

gauge00=BeechV5!Prop, 226,29,35,57
gauge01=BeechV5!Mescla, 72,111,35,57
gauge02=BeechV5!Acelerador, 53,29,35,57
gauge03=BeechV5!SWfuelp, 128,22,18,29
gauge04=BeechV0!TrimMove, 0,6,21,151
gauge05=BeechV6!Fuel_Selector, 293,16,65
gauge06=BeechV4!Brake, 291,91,70,69

//--------------------------------------------------------
[Window05]
file=panel2.bmp
size_mm=1024,768
position=7
visible=0
ident=21

gauge00=BeechV3!Wiskey, 930,229,83,94
gauge01=BeechV4!Warning, 559,310,49,16
gauge02=BeechVB!Avionics Icon, 522,377,29,30
gauge03=BeechVB!Kneeboard Icon, 552,377,29,30
gauge04=BeechVB!ATC Icon, 581,377,29,30
gauge05=BeechVB!ECU Icon, 610,377,29,30
gauge06=BeechVB!Map Icon, 638,377,29,30
gauge07=BeechVB!GPS Icon, 666,377,29,30
gauge08=BeechV7!ToggleClose, 492,378,29,30
gauge09=f1_entegra!PFD, 204,447,315,278
gauge10=f1_entegra!MFD, 521,446,315,278
gauge11=BeechV5!Clock, 873,397,80,79

//--------------------------------------------------------
[Window06]
Background_color=0,0,0
size_mm=250,200
position=0
visible=1
ident=911
window_size=0.24414, 0.26042
window_pos=0.17969, 0.46094

gauge00=f1_entegra!PFD, 0,0, 250,200,popup C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini

//--------------------------------------------------------
[Window07]
Background_color=0,0,0
size_mm=250,200
position=0
visible=1
ident=912
window_size=0.24414, 0.26042
window_pos=0.41895, 0.46094

gauge00=f1_entegra!MFD, 0,0, 250,200,popup C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini

//--------------------------------------------------------
[Vcockpit01]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$Panvcoff

gauge00=BeechVB!Gear Lights, 749,575,55,60
gauge01=BeechVB!Gear In Transition Light, 761,553,30,30
gauge02=BeechV8!GearPos, 802,556,42,89
gauge03=BeechV5!SWbeacon, 234,597,29,27
gauge04=BeechV5!SWland, 324,597,29,27
gauge05=BeechV5!SWnav, 264,597,29,27
gauge06=BeechV5!SWpitotheat, 174,597,29,27
gauge07=BeechV5!SWtaxi, 294,597,29,27
gauge08=BeechV5!SWmasterB, 85,600,29,27
gauge09=BeechV5!SWmasterA, 114,600,29,27
gauge10=BeechV5!SWstrobe, 204,597,29,27
gauge11=BeechV6!Start, 20,603,50
gauge12=BeechV4!CowlFlap, 522,574,50
gauge13=BeechV5!SWfuelp, 651,670,25
gauge14=BeechV4!TrimE, 503, 585 ,25,73
gauge15=beechV8!TrimvMove, 503,673,26

//--------------------------------------------------------
[Vcockpit02]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$PanvcmainL

gauge00=beechV0!Altimetro, 655,631,200,198
gauge01=beechV0!Asi, 183,631,200,198
gauge02=BeechV7!Attitude, 412,631,200,198
gauge03=f1_entegra!MFD, 514,151,500,443,main C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini
gauge04=f1_entegra!PFD, 9,151,500,443,main C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini
gauge05=F1_C172R!NAV1-GPS Switch, 299,57,50,36
gauge06=beechVB!Avionics Icon, 352,58,35,35
gauge07=beechVB!ECU Icon, 424,58,35,35
gauge08=beechVB!GPS Icon, 498,59,35,35
gauge09=beechVB!Kneeboard Icon, 388,58,35,35
gauge10=beechVB!Map Icon, 461,58,35,35

//--------------------------------------------------------
[Vcockpit03]
Background_color=0,0,0
size_mm=1024,1024
visible=0
pixel_size=1024,1024
texture=$PanvcmainR

gauge00=C441!Audio Panel, 478,42,500
gauge01=C441!KX165A Navcom1, 478,127,500
gauge02=C441!KX165A Navcom2, 477,289,500
gauge03=C441!KN62A DME, 478,451,500
gauge04=C441!KR87 ADF, 477,580,500
gauge05=C441!KT76C Transponder, 478,690,500
gauge06=C441!KAP140 Autopilot, 478,818,500
gauge07=C441!Clock, 279,48,150
gauge08=BeechV5!SWavionics, 544,961,50,47

//--------------------------------------------------------
[Vcockpit04]
Background_color=0,0,0
size_mm=128,128
visible=0
pixel_size=128,128
texture=$Panvccoff

gauge00=beechV3!Wiskey, 0,0,128,128

//--------------------------------------------------------
[Vcockpit05]
Background_color=0,0,0
size_mm=128,128
visible=0
pixel_size=128,128
texture=$Panvcairoff

gauge00=BeechV3!TempAir, 30,15,90,90

//--------------------------------------------------------
[Vcockpit06]
Background_color=0,0,0
size_mm=256,256
visible=1
pixel_size=256,256
texture=$panela

gauge00=beechV8!Acelerador, 0,0,255,255

//--------------------------------------------------------
[Vcockpit07]
Background_color=0,0,0
size_mm=256,256
visible=1
pixel_size=256,256
texture=$panelp

gauge00=BeechV8!Paso, 0,0,255,255

//--------------------------------------------------------
[Vcockpit08]
Background_color=0,0,0
size_mm=256,256
visible=1
pixel_size=256,256
texture=$panelm

gauge00=BeechV8!Mescla, 0,0,255,255

//--------------------------------------------------------
[Vcockpit09]
Background_color=0,0,0
size_mm=256,256
visible=1
pixel_size=256,256
texture=$panelf

gauge00=BeechV8!flapVC, 0,0,255,255

[Color]
Day=255,255,255
Night=225,117,89
Luminous=225,117,89

[Default View]
X=0
Y=0
SIZE_X=8191
SIZE_Y=4534

[Window08]
position=0
ident=914
Background_color=0,0,0
size_mm=20,35
window_size=0.01953, 0.04557
window_pos=0.36719, 0.38672
gauge00=f1_APFD_fsav!AP_FD, 0,0, 20,35

Hi !!

A matter of a few months ago I bought emuteq avidyne entegra, and after the closure of flythissim, I had to find my way, well I have mindstar avidyne software running with prepar3d V3 and everything is correct until the mapping of the buttons, guys I am desperate I have tried everything , it generates an avidyne.ini in the software path installation folder and I have tried to configure it in a thousand ways, with fsuipc in the corresponding version and nothing, the buttons do not work, please any light that you can give me in this regard is good ... Thanks in advance.Please help.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
ddewees Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: July-04-2008 Location: United States Points: 32	Post Options Post Reply Quote ddewees Report Post Thanks(0) Quote Reply Topic: Avidyne not creating .ini file?? Posted: August-24-2010 at 5:25pm
	Hi all, I have read through these posts regarding the problems with Avidyne .ini files, however, none have addressed my problem. Hope someone can help. I have attempted many times to install the Avidyne MFD and PFD into a Carenado Beech Bonanza. I can go through all the procedures as outlined in the instructions, the install, the placement of the PFD and MFD on the panel and save everything. Then I go to the Settings Manager, and the aircraft is not recognized in the aircraft drop down menu. I then went to the panel folder to look for the Avidyne.ini file, and there isn't one. If I try to fly the aircraft, I receive an error message saying the program cannot locate the .ini file and to use the Settings Manager to install it...but the plane is not there??? Any ideas? Thanks...

luap Members Profile Send Private Message Find Members Posts Add to Buddy List Certified Professional Joined: December-11-2003 Points: 8089	Post Options Post Reply Quote luap Report Post Thanks(0) Quote Reply Posted: August-26-2010 at 7:47pm
	I'll load up the Avidyne and give it a try for you. I have it but do not use it regularly. I'll have to go thru a setup and that will help because it means I will have to do everything you are trying to do, myself, from scratch.
	Paul Scott Bartelt The grass is always greener over the septic tank

ddewees Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: July-04-2008 Location: United States Points: 32	Post Options Post Reply Quote ddewees Report Post Thanks(0) Quote Reply Posted: August-27-2010 at 6:15pm
	Thank you Paul for taking the time to look into this for me. I have used the program on one other aircraft and it worked fine. I got the .ini file and the panel works great. I just can't get it to work again. I'll look forward to hearing from you.

luap Members Profile Send Private Message Find Members Posts Add to Buddy List Certified Professional Joined: December-11-2003 Points: 8089	Post Options Post Reply Quote luap Report Post Thanks(0) Quote Reply Posted: August-30-2010 at 1:44pm
	I've been fiddling and best I can tell is that you may not have directed the sim at the right FS version (option 1) or your path is incorrect (option 2), in which case just run the registry repair tool that comes with the config tool. Make sure everything says FSX as you move along thru the config)... We are talking FSX, right?
	Paul Scott Bartelt The grass is always greener over the septic tank

ddewees Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: July-04-2008 Location: United States Points: 32	Post Options Post Reply Quote ddewees Report Post Thanks(0) Quote Reply Posted: August-31-2010 at 5:06pm
	Actually Paul, no. I have FSX loaded along with FS9, however, prefer to use FS9. I installed the Avidyne program listing BOTH versions of FS and indicating the path to each. When I start the Avidyne Configuration Manager, it asks which version I am wanting to install the gauges into. I select FS9 and it takes me to the config page where I can select the aircraft from the list it creates. I was able to load the gauges, both windowed (on the 2D panel) and embedded into the virtual panel, of my Beech 18 and everything worked great. But when I attempted to load up the gauges into the Carenado Bonanza, I can load the gauges into the 2D but the program fails to create the .ini file. As a result, each time I start FS9, I get a message saying the program unable to locate the .ini file. I went to the panel folder and sure enough...no .ini file. The Beech 18 panel folder has one. I have looked over the file names, and replaced the space between the words with "_" as was recommended elswhere in this forum but still no .ini file. Hope this helps with the troubleshooting??

luap Members Profile Send Private Message Find Members Posts Add to Buddy List Certified Professional Joined: December-11-2003 Points: 8089	Post Options Post Reply Quote luap Report Post Thanks(0) Quote Reply Posted: August-31-2010 at 9:54pm
	Post your panel.cfg file. Work everywhere else BUT the Bonanza? Connection? Have you querried Carenado on this?
	Paul Scott Bartelt The grass is always greener over the septic tank

ddewees Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: July-04-2008 Location: United States Points: 32	Post Options Post Reply Quote ddewees Report Post Thanks(0) Quote Reply Posted: September-03-2010 at 8:25pm
	Well, I've only tried the one other aircraft. I'll try loading it into something else and let you know if it works. No I haven't contacted Carenado yet. Last time I contacted their support folks they weren't too helpfull. Here is my panel.cfg file for the Carenado Bonanza. I noticed that for some reason, the gauge installer utility loaded the AP/FD Switch (Window 8) as the last entry?? // This Panel.cfg file created by FS Panel Studio panel editor utility - http://www.fspanelstudio.com // Built Sunday, August 29, 2010 at 08:16 FSPS Build:20340 [Window Titles] Window00=Main Window01=Yoke Window02=Radio Stack Window03=GPS Window04=Throttle Quadrant Window05=Big PANEL Window06=FS Avidyne PFD Window07=FS Avidyne MFD Window08=AP_FD_Switch [VIEWS] VIEW_FORWARD_WINDOWS=MAIN_PANEL,21,20,RADIO_STACK_PANEL,GPS_PANEL,THROTTLE_PANEL VIEW_FORWARD_DIR=8.000, 0.000, 0.000 //-------------------------------------------------------- [Window00] file=panel.bmp size_mm=1024 window_size_ratio=1.000 position=7 visible=1 ident=MAIN_PANEL pixel_size=1024,1024 gauge00=BeechV3!Wiskey, 754,182,70,73 gauge01=BeechV5!SWToggle, 758,659,60,56,20 gauge02=BeechV5!Clock, 727,307,72,80 gauge03=BeechV5!SWbeacon, 375,734,25,23 gauge04=BeechV5!SWland, 448,734,25,23 gauge05=BeechV5!SWnav, 400,734,25,23 gauge06=BeechV5!SWpanellight, 545,752,25,23 gauge07=BeechV5!SWpitotheat, 325,734,25,23 gauge08=BeechV5!SWtaxi, 424,734,25,23 gauge09=BeechV5!SWmasterB, 249,733,25,23 gauge10=BeechV5!SWmasterA, 272,733,25,23 gauge11=BeechV1!Flap, 740,729,40,65 gauge12=BeechV3!TempAir, 29,616,79,93 gauge13=BeechVB!Avionics Icon, 444,300,24,23 gauge14=BeechVB!Kneeboard Icon, 469, 300 ,24,23 gauge15=BeechVB!ECU Icon, 494,300,24,23 gauge16=BeechVB!Map Icon, 518,300,25,23 gauge17=BeechVB!Gear Lights, 838,724,45,50 gauge18=BeechVB!Gear In Transition Light, 849,717,20,19 gauge19=BeechVB!Gear Lever, 890,719,40,55 gauge20=BeechV4!CowlFlap, 680,730,36,35 gauge21=BeechV5!SWstrobe, 350,734,25,23 gauge22=BeechV4!TrimE, 624,720,24,49 gauge23=BeechV4!Warning, 466,246,33,10 gauge24=BeechV6!Start, 175,730,40,35 gauge25=BeechV7!ToggleOpen, 543,301,23,22 gauge26=beechV0!Altimetro, 527,583,115,115 gauge27=beechV0!Asi, 254,583,115,115 gauge28=BeechV7!Attitude, 391,583,115,115 gauge29=C441!KX165A Navcom2, 822,398,201,64 gauge30=C441!KR87 ADF, 822,514,200,43 gauge31=C441!KT76C Transponder, 822,559,200,51 gauge32=C441!KAP140 Autopilot, 822,612,200,51 gauge33=C441!KN62A DME, 822,462,200,51 gauge34=C441!KX165A Navcom1, 822,333,200,64 gauge35=C441!Audio Panel, 821,299,200,34 gauge36=BeechV5!SWavionics, 848,681,25,24 gauge37=F1_C172R!NAV1-GPS Switch, 411,301,32,22 //-------------------------------------------------------- [Window01] file=yoke.bmp size_mm=1024 position=7 visible=0 ident=20 gauge00=BeechV5!SWToggle, 343,620,80,80,20 //-------------------------------------------------------- [Window02] Background_color=2,2,2 size_mm=220,393 position=5 visible=0 ident=RADIO_STACK_PANEL pixel_size=1024,1024 gauge00=C441!Audio Panel, 1,1,217 gauge01=C441!KX165A Navcom1, 0,38,217 gauge02=C441!KX165A Navcom2, 0,107,217 gauge03=C441!KR87 ADF, 0,177,217 gauge04=C441!KN62A DME, 1,224,217 gauge05=C441!KT76C Transponder, 0,281,217 gauge06=C441!KAP140 Autopilot, 0,337,217 //-------------------------------------------------------- [Window03] Background_color=16,16,16 size_mm=329,272 position=2 visible=0 ident=GPS_PANEL gauge00=fs9gps!gps_500, 0,0,327,271 //-------------------------------------------------------- [Window04] file=paneltrole.bmp size_mm=370,163 window_size_ratio=0.300 position=8 visible=0 ident=THROTTLE_PANEL gauge00=BeechV5!Prop, 226,29,35,57 gauge01=BeechV5!Mescla, 72,111,35,57 gauge02=BeechV5!Acelerador, 53,29,35,57 gauge03=BeechV5!SWfuelp, 128,22,18,29 gauge04=BeechV0!TrimMove, 0,6,21,151 gauge05=BeechV6!Fuel_Selector, 293,16,65 gauge06=BeechV4!Brake, 291,91,70,69 //-------------------------------------------------------- [Window05] file=panel2.bmp size_mm=1024,768 position=7 visible=0 ident=21 gauge00=BeechV3!Wiskey, 930,229,83,94 gauge01=BeechV4!Warning, 559,310,49,16 gauge02=BeechVB!Avionics Icon, 522,377,29,30 gauge03=BeechVB!Kneeboard Icon, 552,377,29,30 gauge04=BeechVB!ATC Icon, 581,377,29,30 gauge05=BeechVB!ECU Icon, 610,377,29,30 gauge06=BeechVB!Map Icon, 638,377,29,30 gauge07=BeechVB!GPS Icon, 666,377,29,30 gauge08=BeechV7!ToggleClose, 492,378,29,30 gauge09=f1_entegra!PFD, 204,447,315,278 gauge10=f1_entegra!MFD, 521,446,315,278 gauge11=BeechV5!Clock, 873,397,80,79 //-------------------------------------------------------- [Window06] Background_color=0,0,0 size_mm=250,200 position=0 visible=1 ident=911 window_size=0.24414, 0.26042 window_pos=0.17969, 0.46094 gauge00=f1_entegra!PFD, 0,0, 250,200,popup C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini //-------------------------------------------------------- [Window07] Background_color=0,0,0 size_mm=250,200 position=0 visible=1 ident=912 window_size=0.24414, 0.26042 window_pos=0.41895, 0.46094 gauge00=f1_entegra!MFD, 0,0, 250,200,popup C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini //-------------------------------------------------------- [Vcockpit01] Background_color=0,0,0 size_mm=1024,1024 visible=0 pixel_size=1024,1024 texture=$Panvcoff gauge00=BeechVB!Gear Lights, 749,575,55,60 gauge01=BeechVB!Gear In Transition Light, 761,553,30,30 gauge02=BeechV8!GearPos, 802,556,42,89 gauge03=BeechV5!SWbeacon, 234,597,29,27 gauge04=BeechV5!SWland, 324,597,29,27 gauge05=BeechV5!SWnav, 264,597,29,27 gauge06=BeechV5!SWpitotheat, 174,597,29,27 gauge07=BeechV5!SWtaxi, 294,597,29,27 gauge08=BeechV5!SWmasterB, 85,600,29,27 gauge09=BeechV5!SWmasterA, 114,600,29,27 gauge10=BeechV5!SWstrobe, 204,597,29,27 gauge11=BeechV6!Start, 20,603,50 gauge12=BeechV4!CowlFlap, 522,574,50 gauge13=BeechV5!SWfuelp, 651,670,25 gauge14=BeechV4!TrimE, 503, 585 ,25,73 gauge15=beechV8!TrimvMove, 503,673,26 //-------------------------------------------------------- [Vcockpit02] Background_color=0,0,0 size_mm=1024,1024 visible=0 pixel_size=1024,1024 texture=$PanvcmainL gauge00=beechV0!Altimetro, 655,631,200,198 gauge01=beechV0!Asi, 183,631,200,198 gauge02=BeechV7!Attitude, 412,631,200,198 gauge03=f1_entegra!MFD, 514,151,500,443,main C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini gauge04=f1_entegra!PFD, 9,151,500,443,main C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini gauge05=F1_C172R!NAV1-GPS Switch, 299,57,50,36 gauge06=beechVB!Avionics Icon, 352,58,35,35 gauge07=beechVB!ECU Icon, 424,58,35,35 gauge08=beechVB!GPS Icon, 498,59,35,35 gauge09=beechVB!Kneeboard Icon, 388,58,35,35 gauge10=beechVB!Map Icon, 461,58,35,35 //-------------------------------------------------------- [Vcockpit03] Background_color=0,0,0 size_mm=1024,1024 visible=0 pixel_size=1024,1024 texture=$PanvcmainR gauge00=C441!Audio Panel, 478,42,500 gauge01=C441!KX165A Navcom1, 478,127,500 gauge02=C441!KX165A Navcom2, 477,289,500 gauge03=C441!KN62A DME, 478,451,500 gauge04=C441!KR87 ADF, 477,580,500 gauge05=C441!KT76C Transponder, 478,690,500 gauge06=C441!KAP140 Autopilot, 478,818,500 gauge07=C441!Clock, 279,48,150 gauge08=BeechV5!SWavionics, 544,961,50,47 //-------------------------------------------------------- [Vcockpit04] Background_color=0,0,0 size_mm=128,128 visible=0 pixel_size=128,128 texture=$Panvccoff gauge00=beechV3!Wiskey, 0,0,128,128 //-------------------------------------------------------- [Vcockpit05] Background_color=0,0,0 size_mm=128,128 visible=0 pixel_size=128,128 texture=$Panvcairoff gauge00=BeechV3!TempAir, 30,15,90,90 //-------------------------------------------------------- [Vcockpit06] Background_color=0,0,0 size_mm=256,256 visible=1 pixel_size=256,256 texture=$panela gauge00=beechV8!Acelerador, 0,0,255,255 //-------------------------------------------------------- [Vcockpit07] Background_color=0,0,0 size_mm=256,256 visible=1 pixel_size=256,256 texture=$panelp gauge00=BeechV8!Paso, 0,0,255,255 //-------------------------------------------------------- [Vcockpit08] Background_color=0,0,0 size_mm=256,256 visible=1 pixel_size=256,256 texture=$panelm gauge00=BeechV8!Mescla, 0,0,255,255 //-------------------------------------------------------- [Vcockpit09] Background_color=0,0,0 size_mm=256,256 visible=1 pixel_size=256,256 texture=$panelf gauge00=BeechV8!flapVC, 0,0,255,255 [Color] Day=255,255,255 Night=225,117,89 Luminous=225,117,89 [Default View] X=0 Y=0 SIZE_X=8191 SIZE_Y=4534 [Window08] position=0 ident=914 Background_color=0,0,0 size_mm=20,35 window_size=0.01953, 0.04557 window_pos=0.36719, 0.38672 gauge00=f1_APFD_fsav!AP_FD, 0,0, 20,35

Ed Struzynski Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: December-26-2002 Points: 370	Post Options Post Reply Quote Ed Struzynski Report Post Thanks(0) Quote Reply Posted: September-10-2010 at 12:07am
	Try putting your filename in quotes, e.g. gauge00=f1_entegra!PFD, 0,0, 250,200,popup "C:\Program Files\Microsoft Games\Flight Simulator 9\aircraft\Bonanza_V35b\panel\fsavidyne.ini" Also, if you're running Vista or 7 you will either need to disable UAC or run all of the tools as Administrator as you have installed FS into a protected folder.

Artf84 Members Profile Send Private Message Find Members Posts Add to Buddy List New Member Joined: July-29-2020 Points: 3	Post Options Post Reply Quote Artf84 Report Post Thanks(0) Quote Reply Posted: November-05-2020 at 3:34am
	Hi !! A matter of a few months ago I bought emuteq avidyne entegra, and after the closure of flythissim, I had to find my way, well I have mindstar avidyne software running with prepar3d V3 and everything is correct until the mapping of the buttons, guys I am desperate I have tried everything , it generates an avidyne.ini in the software path installation folder and I have tried to configure it in a thousand ways, with fsuipc in the corresponding version and nothing, the buttons do not work, please any light that you can give me in this regard is good ... Thanks in advance.Please help.