SimForums.com Homepage
Forum Home Forum Home > Flight One Partner Forums > Opus Software
  New Posts New Posts RSS Feed - Announcements
  FAQ FAQ  Forum Search   Register Register  Login Login

Topic ClosedAnnouncements
 Post Reply Post Reply Page  <1 202122
Author
Message
 Rating: Topic Rating: 1 Votes, Average 5.00  Topic Search Topic Search  Topic Options Topic Options
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: January-09-2022 at 3:02am
OpusFSI Release Version 5.49.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Regards
Stephen Smile

N.B. Older Windows 7 systems may need upgrading to .Net Framework 4.8 standard. If so please use the following link,
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: January-09-2022 at 3:04am
OpusFSI Release Version 6.20.3 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: April-11-2022 at 4:36am
OpusFSI Release Version 6.20.4 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

The displayed sim mode (V4 or V5) in the P3DSERVER caption is now updated whenever OpusFSI receives a version update via SimConnect.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: June-11-2022 at 4:42am
OpusMSFS Release Version 1.11.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Updated the software in line with the latest MS and Asobo updates. Previous versions would not be able to locate the installed aircraft types as the install paths had been changed by Asobo.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-03-2022 at 3:44am
OpusFSI Beta Version 5.50.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Modified the GRIB download procedure in FSX mode to overcome problem accessing the GRIB server (security issues) with the older .NET Framework 2.0 software. The program NOAA_QUERY.EXE will also need to be allowed through the Firewall as it is this program that downloads the actual GRIB data file.

Regards
Stephen Smile

N.B. Older Windows 7 systems may need upgrading to .Net Framework 4.8 standard. If so please use the following link,
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-05-2022 at 12:23pm
OpusFSI Beta Version 5.50.1 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Added delays to the GRIB file download and checked for zero size files within the NOAA_QUERY.EXE software.

Regards
Stephen Smile

N.B. Older Windows 7 systems may need upgrading to .Net Framework 4.8 standard. If so please use the following link,
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-07-2022 at 3:58am
OpusFSI Beta Version 5.50.2 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Modified the NOAA_QUERY.EXE software to monitor the GRIB download and generate a NOAA_QUERY.log report file. The report file logs the outcome of the GRIB data download process within the NOAA_QUERY program along with any reported errors.

Regards
Stephen Smile

N.B. Older Windows 7 systems may need upgrading to .Net Framework 4.8 standard. If so please use the following link,
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-08-2022 at 2:34am
OpusFSI Beta Version 5.50.3 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Added statements to try and force the use of secure protocols when downloading GRIB data via the NOAA_QUERY program (required on older Windows 7 systems).

Regards
Stephen Smile

N.B. Older Windows 7 systems may need upgrading to .NET Framework 4.8 standard. If so, please use the following link.
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-09-2022 at 3:06am
OpusFSI Release Version 5.50.3 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Regards
Stephen Smile

N.B.

Older Windows 7 systems may need upgrading to .NET Framework 4.8 standard. If so, please use the following link.


To access the new GRIB data servers, older Windows 7 users may need to upgrade to Windows 10. Windows 7 is no longer supported by Microsoft this is a free upgrade. Please use the following link to see how to upgrade for free,
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: December-17-2022 at 6:17am
OpusFSI Release Version 6.20.5 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Corrected a problem mapping key input events.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: January-16-2023 at 3:52am
OpusMSFS Release Version 1.12.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Modified the OpusMSFS Client so that it connects to the server via a single Position Update LAN link. Intended to be more efficient when connected to an OpusFSI v5 or v6 server.

This update is for people using FSX or P3D as their main 'flying' server and want to use an MSFS (FS2020) OpusMSFS Client to provide their scenic 'out of cockpit' views. All non-scenery and non-weather options (including all damage and failure options) in MSFS should be turned off or set to a minimum, the simple Legacy FSX flight model should also be selected along with a 'simple' (cold and dark) aircraft (such as the simple MSFS Glider).

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-01-2023 at 10:49am
OpusFSI v6 Historic Weather Update

I am preparing a new beta with an improved Historic Weather option. The new beta will access the NOAA Aviation Weather Centre’s Text Server allowing the user to specify any date and time over the previous 14 days as the reference source of their weather. The reference period will advance in line with the elapsed time during the flight.

Regards
Stephen
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-03-2023 at 6:00am
OpusFSI Beta Version 6.30.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Upgrades to the OpusFSI v6 Historic Weather

The new Historic Weather mode in the OpusFSI v6 P3DSERVER program accesses the NOAA Aviation Weather Centre’s Text Server to allow up to 14-days of histroic weather data to be accessed. This data is fully time-synchronised with the OpusFSI's GFS GRIB 'atmospheric' data to provide world-wide historic weather coverage.

The following Historic Weather Settings are now available, accessed via the OpusFSI Weather dialog,



Historic Date of Interest

Allows the local date of interest to be specified limited to any day over the past two weeks.

Local Time

Allows the local time of interest (00:00 to 23:59 Local) to be specified using two numeric up/down boxes.

Enable Historic Weather

When this checkbox option is ticked, Historic Weather mode is enabled. This checkbox mirrors the Historic Weather option displayed in the Weather dialog.

Static Historic Weather

When this checkbox option is ticked, the specified date and time of interest will remain static. When unticked, the weather update time will advance as normal after the first historic weather download and update.

Reset Historic Weather

When this checkbox option is ticked, the historic weather update time will be reset back to the specified date and time of interest.

Set System Time

Sets the local time of interest to the current system (PC) time.

Set Simulator Time

Sets the local time of interest to the current simulator (Prepar3D) time.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-05-2023 at 3:17am
OpusFSI Beta Version 6.30.1 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Both the Weather Locator/Overview and Save World Weather Theme (WWT) features are limited to historic weather data that is less than 24 hours old.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-06-2023 at 11:40am
OpusMSFS Beta Version 1.14.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Modified the OPUSFSCTQ.EXE FSC Motorised Throttle Quadrant driver program to interface with the latest PMDG 737 SDK. Corrected anomalies with the Parking Brake, TOGA operation and Reverse Thrust lever control.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-07-2023 at 9:23am
OpusMSFS Beta Version 1.15.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Modified the OPUSFSCTQ.EXE FSC Motorised Throttle Quadrant driver program to include separate ENABLED and ARMED Speed Brake calibrated positions. The separation allows for the Speed Brake lever on the TQ to be raised out of the gate on take off without registering in the ARMED position. This allows the speed brake motor to be controlled during RTO operations in the 737 without generating a 737 Config warning (due to the Speed Brakes being ARMED) during the take off roll.

Removed a conflict between the OPUSFSCTQ and PMDG 737 speed brake (spoiler) controls which was causing the MSFS code to disconnect it's SimConnect links.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-08-2023 at 4:16am
OpusMSFS Beta Version 1.15.1 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Disabled all MCP/EFIS control within the FSIPMDG program. The CPFlight MCP/EFIS panel driver is inoperative at present and will remain so until tested with the latest PMDG SDK for MSFS.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-09-2023 at 6:02am
OpusMSFS Beta Version 1.15.2 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Added STAB TRIM calibration values to the FSC Analogue IO Test dialog. FSC Trim wheel speed reduced.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-10-2023 at 7:20am
OpusMSFS Beta Version 1.15.3 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
The OPUSFSCTQ driver program now accepts the following program arguments,

TEST - Operates in test mode
MOTORISED - Selects the Motorised operation (default)
NONMOTORISED - Selects the Non-Motorised operation

By default the driver program powers up in the MOTORISED state.

The default FSC Trim wheel speed is now set to 7. The FSC Trim Wheel speed can be set from 2 (slow) to 12 (fast) within the FSC Digital IO Test dialog. The min, max, and default setting of 7 as indicated within the dialog.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-12-2023 at 7:41am
OpusMSFS Beta Version 1.15.4 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Tweaked trim wheel sensitivity to trim adjustment settings in OPUSFSCTQ driver program, also differentiated between ground and in-flight trim wheel operation.

Removed all Test buttons on the OPUSFSCTQ main form. Added a minor version number to OPUSFSCTQ driver.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-28-2023 at 5:06am
OpusMSFS Beta Version 1.15.5 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Corrected a problem downloading new release and beta versions from within the 'Check For Updates' dialog.

OPUSFSCTQ data filename automatically changed from FSCTQ.DAT to OPUSFSCTQ.DAT. Reverser control modified to take into account the sims throttle behaviour and the possible slackness in the TQ reverser levers.

Included the first beta prototype of the new OPUSCPFMCP driver program for the CPFlight 737 MCP/EFIS panels.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: March-29-2023 at 4:29am
OpusMSFS Beta Version 1.15.6 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
The OPUSFSCTQ driver program now controls the FSC TQ's backlight in sync with the PMDG 737's Pedistal Blight knob. N.B. The backlight control on the TQ is purely on/off with no brightness control.

The OPUSCPFMCP driver program's power on/off process has been disabled to prevent conflict with the light test within the aircraft which previously needed a full reconnection of the driver and at times a powered restart of the MCP/EFIS panels.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: April-02-2023 at 2:55am
OpusMSFS Beta Version 1.15.8 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Altered timing and procedures in the OPUSFSCTQ driver for reversers adjustment both when engaging reverse thrust and stowing the reversers.

Improved Mins and Baro adjustment within the OPUSCPFMCP driver.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: June-20-2023 at 3:05am
OpusMSFS Beta Version 1.17.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Modified the OPUSCPFMCP driver to allow the PMDG 737 aircraft to update the COURSE 1 and 2 displays on the CPFlight MCP panel.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: June-21-2023 at 3:13am
OpusMSFS Beta Version 1.17.1 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
Added message counter to the FSIPMDG console window display. Improved the synchronisation between the PMDG aircraft data and OPUSCPFMCP driver's control.
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: June-22-2023 at 2:07am
OpusMSFS Release Version 1.17.1 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: August-05-2023 at 4:42am
OpusFSI Beta Version 6.31.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Software built using latest Lockheed Martin Prepar3D v5.4 SDK. This should be compatible with the latest Prepar3D version 5.4 and version 6 simulators.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: August-08-2023 at 2:09am
OpusFSI Beta Version 6.31.1 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


This rebuild of the software should be compatible with ALL Prepar3D versions 4.5 onwards, including the latest Prepar3D versions 5.4 and 6.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: August-10-2023 at 2:29am
OpusFSI Beta Version 6.31.2 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Modified OpusFSI v6 and the PDKSETUP.EXE program to include the new OpusPDK_v6 library software for full compatibility with the new P3Dv6 simulator.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: August-11-2023 at 1:32am
OpusFSI Beta Version 6.31.3 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Corrected an omission within the P3DCLIENT's OpusPDK interface that prevented client systems connecting to the new OpusPDK for P3Dv6.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: August-12-2023 at 1:20am
OpusFSI Release Version 6.31.3 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: August-29-2023 at 2:10am
OpusMSFS Beta Version 1.17.2 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
The OPUSFSCTQ driver program now allows the Backlight and Trim Wheel directional controls to be reversed. The reverse options can be adjusted within the Digital I/O Test dialog, default condition is false (off).
 
Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-07-2023 at 1:33am
OpusMSFS Release Version 1.17.2 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-20-2023 at 3:44am
OpusFSI Release Version 6.32.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm


Release version.

Individual METARs are no longer reported in the Spy window during the download.
All NOAA Met station data updated.

Regards
Stephen Smile
Back to Top
Opus Software View Drop Down
Senior Member
Senior Member


Joined: April-12-2012
Location: Grantham, UK
Points: 15442 		Direct Link To This Post Posted: September-20-2023 at 3:47am
OpusMSFS Beta Version 1.18.0 is now available for download on our website.

Download from http://www.opussoftware.co.uk/opusfsi/downloads.htm
 
 
The OpusFSI v6 Weather Engine and Weather Locator features have been added just in case people find the features useful and to be ready should MS and Asobo allow some form of supported weather injection in the future. All NOAA Met station data has also been updated.
 
Regards
Stephen Smile
Back to Top
 Post Reply Post Reply Page  <1 202122

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.06
Copyright ©2001-2023 Web Wiz Ltd.

This page was generated in 0.516 seconds.