(Solved) Airbus Extended alway out of trim

When I choose the Airbus Ext I always wait but it's never ready to take control, where the vertical speed always jump.
I use FSUIPC for all the axis as Direct to FSUIPC , only for the Airbus Ext is set to send to FS as normal -> AXIS and AXIS Throttle 1 Set same for two.
I also use other aircraft like the PMDG 737 and it works well apart some time.

So After reading your initial request I paste the log filr to let you check.
Load FSX choose C172 at an airport open FSIP choose runway and 8NM and move.
By the way thank's for the last update and foremost the landing score is really appreciated,
I hope that in a future update, we can archive those result and create a chart for progress.

Can you tell me what in real life are the vertical speed at touch down on average, after landed with 347 the report says it was Ok but I thought and read that it's bad for comfort?
Can you share a table or explain in the manual the standard that come in the score.

Thank you
Fabrizio

16.07 22:25:02   FSiPanel Started
16.07 22:25:02   FSiPanel version : 1.0.0.51
16.07 22:25:02   FSiPanel has administrator rights
16.07 22:25:04   ProcessClientOrder : Order = FSI@METAR@SET@GLOB 160737Z 35000KT CAVOK 15/05 Q1013@1@@1
16.07 22:25:06   PMDG737 : C:\FSX\PMDG\PMDG 737 NGX\PanelState
16.07 22:25:06   PMDG777 : C:\FSX\PMDG\PMDG 777X\PanelState
16.07 22:25:06   PMDG747 : C:\FSX\PMDG\747400\PanelState
16.07 22:25:06   PMDG Flight plan: C:\FSX\PMDG\FLIGHTPLANS
16.07 22:25:06   AES 320 panelstate folder: C:\Users\Pascucci\Documents\Aerosoft\AerosoftAirbusExtended
16.07 22:25:29   ProcessClientOrder : Order = FSI@MOVE@ILS@LSGG@05@@4600@0@10@0@0@3@0@DEFAULT
16.07 22:25:29   FSiPanel will now start the flight
16.07 22:25:30   LoadFlight Stage 400, filename : C:\Program Files (x86)\FSiPanel\FSiPanel\SituationFiles\Aerosoft32060tAirbusA320easyJetGEZTBFINAL.FLT
16.07 22:25:35   FSX not ready, waiting
16.07 22:25:36   FSX not ready, waiting
16.07 22:25:37   FSX1 = 0 FSX2 = 3
16.07 22:25:37   FSX not ready, waiting
16.07 22:25:38   FSX not ready, waiting
16.07 22:25:39   FSX1 = 0 FSX2 = 3
16.07 22:25:39   FSX not ready, waiting
16.07 22:25:40   FSX not ready, waiting
16.07 22:25:41   FSX1 = 0 FSX2 = 3
16.07 22:25:41   FSX not ready, waiting
16.07 22:25:42   FSX not ready, waiting
16.07 22:25:43   FSX1 = 0 FSX2 = 3
16.07 22:25:43   FSX not ready, waiting
16.07 22:25:44   FSX not ready, waiting
16.07 22:25:45   FSX1 = 0 FSX2 = 3
16.07 22:25:45   FSX not ready, waiting
16.07 22:25:46   FSX not ready, waiting
16.07 22:25:47   FSX1 = 0 FSX2 = 3
16.07 22:25:47   FSX not ready, waiting
16.07 22:25:48   FSX not ready, waiting
16.07 22:25:49   FSX1 = 0 FSX2 = 3
16.07 22:25:49   FSX not ready, waiting
16.07 22:25:50   FSX not ready, waiting
16.07 22:25:51   FSX1 = 0 FSX2 = 3
16.07 22:25:51   FSX not ready, waiting
16.07 22:25:52   FSX not ready, waiting
16.07 22:25:53   FSX1 = 0 FSX2 = 3
16.07 22:25:53   FSX not ready, waiting
16.07 22:25:54   FSX not ready, waiting
16.07 22:25:55   Initial Timer = 10696.239
16.07 22:25:55   FSX not ready, waiting
16.07 22:25:56   FSX not ready, waiting
16.07 22:25:57   Initial Elapsed Time : 10696.239 Actual : 10698.252
16.07 22:25:57   FSX not ready, waiting
16.07 22:25:58   FSX not ready, waiting
16.07 22:25:59   Initial Elapsed Time : 10696.239 Actual : 10700.264
16.07 22:25:59   FSX not ready, waiting
16.07 22:26:00   FSX not ready, waiting
16.07 22:26:01   Initial Elapsed Time : 10696.239 Actual : 10702.276
16.07 22:26:01   FSX not ready, waiting
16.07 22:26:02   FSX not ready, waiting
16.07 22:26:03   FSX is ready to fly!
16.07 22:26:03   LoadFlight Stage 22, FSX Ready
16.07 22:26:11   FSX not ready, waiting
16.07 22:26:11   Initial Timer = 10712.651
16.07 22:26:12   FSX not ready, waiting
16.07 22:26:13   Initial Elapsed Time : 10712.651 Actual : 10714.632
16.07 22:26:13   FSX not ready, waiting
16.07 22:26:14   FSX not ready, waiting
16.07 22:26:15   Initial Elapsed Time : 10712.651 Actual : 10716.644
16.07 22:26:15   FSX not ready, waiting
16.07 22:26:17   FSX not ready, waiting
16.07 22:26:17   Initial Elapsed Time : 10712.651 Actual : 10718.657
16.07 22:26:18   FSX not ready, waiting
16.07 22:26:19   FSX not ready, waiting
16.07 22:26:19   FSX is ready to fly!
16.07 22:26:20   LoadFlight Stage 22, FSX Ready
16.07 22:26:20   Desired Pos : 46.1008224487305 5.90793609619141
16.07 22:26:20   Sim Act pos = 46.1008222222152 5.90793611111096
16.07 22:26:20   Position ok : Offset : 0
16.07 22:26:21   Waiting for FSX to be ready
16.07 22:26:22   Waiting for FSX to be ready
16.07 22:26:22   Initial Timer = 10722.791
16.07 22:26:23   Waiting for FSX to be ready
16.07 22:26:24   Initial Elapsed Time : 10722.791 Actual : 10724.803
16.07 22:26:24   Waiting for FSX to be ready
16.07 22:26:25   Waiting for FSX to be ready
16.07 22:26:26   Initial Elapsed Time : 10722.791 Actual : 10726.8
16.07 22:26:26   Waiting for FSX to be ready
16.07 22:26:27   Waiting for FSX to be ready
16.07 22:26:28   Initial Elapsed Time : 10722.791 Actual : 10728.828
16.07 22:26:28   Waiting for FSX to be ready
16.07 22:26:29   Waiting for FSX to be ready
16.07 22:26:30   FSX is ready to fly!
16.07 22:27:06   Ready to unfreeze, actual IAS = 113 Desired IAS = 134
16.07 22:27:06   Aircraft release for flight at : 7/16/2014 10:27:06 PM

I will check this in two weeks as I am off.
thanks for reply

Hi,

Thanks for the picture.
It looks like your thrust lever is not at the correct position.

Start with your Thrust levers to IDLE.
When FSiPanel asks you to set CL (Climb thrust), move your thrust levers forward slowly until you get CLB as thrust mode on your PFD.

This should fix the problem.

Please let me know.

Safe flights,

J-P

If you look at this video:

http://youtu.be/aqux-RCzlSY

Is the loading of your flight similar?

You should see the message on the top bar, not anymore in the middle of the screen as on this video.

if you look on the top left of the PFD, you see that autothrust is disconnected, no active mode.

When asked to move the TL to climb, you can see that Autothrust engages in SPEED mode.

In your case, even if the mode is TOGA LK, once the speed is above target speed, you should be able to reduce your thrust levers to CLIMB and autothrust should then revert to SPEED MODE.

J-P

Some time a go I had correctly setup FSUIPC to LUA Airbus THR1 instead  AXIS Throttle 1 Set but something have change it.
This is why the lever didn't works correctly, the only difference with your video is that I don't get the LUA message.
I had also to recreate a new profile for the airbus.
What now don't work is, I can get TAKE SNAPSHOT or LOAD SNAPSHOT they are all grayed (not available)
Is it possible to have a button in FSIP that even if the aircraft is not perfectly configured we can get control of it.
Tank's

PS can you tell me more on this request:

The landing score is really appreciated,
I hope that in a future update, we can archive those result and create a chart for progress.

Can you tell me what in real life are the vertical speed at touch down on average, after landed with 347 the report says it was Ok but I thought and read that it's bad for comfort?
Can you share a table or explain in the manual the standard that come in the score.

Tank's for the input.