Print Page | Close Window


Printed From:
Category: Flight One Partner Forums
Forum Name: FS Panel/Sound Studio Forums
Forum Description: Discussion and support for FS Panel Studio and FS Sound Studio
Printed Date: February-28-2020 at 6:37am
Software Version: Web Wiz Forums 12.01 -

Topic: HSI
Posted By: Bikerdad57
Subject: HSI
Date Posted: February-22-2012 at 9:45pm
Is there a way to install an HSI into the Carenado 114 Commander?

Posted By: luap
Date Posted: February-22-2012 at 11:03pm
A lot of it depends on the Commander 3D model geometry as to how well you can implement a gauge into it.  If you have a gauge that is a 1:1 swap (same basic size, etc as existing), then yes.  If not 1:1, then the end result may not be quite perfect.

Some addons are very receptive to gauge swaps because their base geometry is very generic, others with their fancy knobs and lighting schemes make them less so.


Paul Scott Bartelt

The grass is always greener over the septic tank

Posted By: Bikerdad57
Date Posted: February-22-2012 at 11:50pm
Thank you for your reply! When i load the panel cfg into FS panel design the only windows that will open are the radio stack and the gps. I can't find the main panel to try an do a swap.

Posted By: Bert Pieke
Date Posted: February-23-2012 at 11:33am
Open up the panel.cfg file with Notepad and look for the Vcockpit section(s).

If the main gauges are not listed, they cannot be replaced.

Many newer airplanes have fully modeled gauges that are part of the 3d model and cannot be changed by the user.


Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 -
Copyright ©2001-2018 Web Wiz Ltd. -